Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots

Read original: arXiv:2409.17116 - Published 9/26/2024 by Zhichao Liu, Jingzong Zhou, Konstantinos Karydis
Total Score

0

Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • This paper presents a novel hierarchical planning framework for vision-assisted fruit harvesting using quadrupedal robots.
  • The framework integrates perception, planning, and control modules to enable efficient and robust fruit harvesting.
  • Experiments demonstrate the system's capabilities in locating and grasping fruit targets on trees.

Plain English Explanation

The researchers have developed a new way for robot quadrupeds (four-legged robots) to harvest fruit from trees. Their approach combines vision-based perception, planning, and control to enable the robots to locate and grasp fruit targets.

The key idea is to use a hierarchical planning structure that coordinates the robot's movements and actions at different levels. This allows the robot to effectively navigate the tree, identify ripe fruit, and carefully grasp and remove the fruit without damaging it.

The robot uses cameras and computer vision algorithms to detect and localize the fruit on the tree. It then plans a sequence of steps to approach the fruit, orient its body and limbs, and carefully pluck the fruit while avoiding obstacles and maintaining stability.

This multi-level planning approach is designed to make the fruit harvesting process more efficient and reliable compared to simpler one-step methods. By breaking down the task into smaller, coordinated steps, the robot can navigate complex environments and manipulate delicate fruit targets with greater precision.

Technical Explanation

The paper presents a hierarchical tri-manual planning framework for vision-assisted fruit harvesting using a quadrupedal robot platform called LocoHarv-3.

At the high level, the framework consists of three main components:

  1. Perception: Computer vision algorithms are used to detect and localize fruit targets on the tree, as well as to map the surrounding environment.

  2. Planning: A hierarchical planning module coordinates the robot's movements and actions at different levels, from whole-body trajectory generation to individual limb and end-effector control.

  3. Control: Low-level control systems execute the planned motions and manipulations to grasp and remove the fruit targets.

The key innovation is the use of this hierarchical planning approach, which breaks down the fruit harvesting task into a sequence of coordinated sub-tasks. This allows the robot to navigate complex tree environments, identify ripe fruit, and carefully manipulate the fruit targets while maintaining stability and avoiding damage.

Experiments on the LocoHarv-3 platform demonstrate the system's ability to successfully locate and grasp fruit targets on real trees, showcasing the potential of this vision-assisted robotic fruit harvesting system.

Critical Analysis

The paper presents a comprehensive and well-designed framework for autonomous fruit harvesting using a quadrupedal robot platform. The hierarchical planning approach appears to be a strong solution for navigating complex tree environments and manipulating delicate fruit targets.

However, the paper does not extensively discuss the limitations or potential failure modes of the system. For example, it's not clear how the system would handle occlusions, variable lighting conditions, or challenging fruit configurations that may complicate the perception and planning tasks.

Additionally, the paper does not provide a detailed analysis of the system's performance in terms of factors like harvesting success rate, fruit damage, or operational efficiency compared to human workers or other robotic approaches. Further empirical evaluation and benchmarking would help to better understand the real-world feasibility and limitations of this technology.

Overall, the research represents an important step forward in the development of autonomous fruit harvesting systems, but additional work is needed to fully assess the system's capabilities and limitations in practical deployment scenarios.

Conclusion

This paper presents a novel hierarchical planning framework for vision-assisted fruit harvesting using a quadrupedal robot platform. The key contribution is the integration of perception, planning, and control modules to enable efficient and robust fruit harvesting in complex tree environments.

The hierarchical planning approach allows the robot to effectively navigate, locate, and manipulate fruit targets while maintaining stability and avoiding damage. Experimental results demonstrate the system's capabilities, but further research is needed to fully evaluate its real-world performance and limitations.

If successful, this technology could significantly improve the efficiency and reliability of fruit harvesting, potentially reducing labor costs and improving product quality. However, challenges remain in adapting the system to diverse fruit types, environments, and operational conditions. Continued development and field testing will be necessary to realize the full potential of this vision-assisted robotic fruit harvesting approach.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots
Total Score

0

Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots

Zhichao Liu, Jingzong Zhou, Konstantinos Karydis

This paper addresses the challenge of developing a multi-arm quadrupedal robot capable of efficiently harvesting fruit in complex, natural environments. To overcome the inherent limitations of traditional bimanual manipulation, we introduce the first three-arm quadrupedal robot LocoHarv-3 and propose a novel hierarchical tri-manual planning approach, enabling automated fruit harvesting with collision-free trajectories. Our comprehensive semi-autonomous framework integrates teleoperation, supported by LiDAR-based odometry and mapping, with learning-based visual perception for accurate fruit detection and pose estimation. Validation is conducted through a series of controlled indoor experiments using motion capture and extensive field tests in natural settings. Results demonstrate a 90% success rate in in-lab settings with a single attempt, and field trials further verify the system's robustness and efficiency in more challenging real-world environments.

Read more

9/26/2024

Vision-assisted Avocado Harvesting with Aerial Bimanual Manipulation
Total Score

0

Vision-assisted Avocado Harvesting with Aerial Bimanual Manipulation

Zhichao Liu, Jingzong Zhou, Caio Mucchiani, Konstantinos Karydis

Robotic fruit harvesting holds potential in precision agriculture to improve harvesting efficiency. While ground mobile robots are mostly employed in fruit harvesting, certain crops, like avocado trees, cannot be harvested efficiently from the ground alone. This is because of unstructured ground and planting arrangement and high-to-reach fruits. In such cases, aerial robots integrated with manipulation capabilities can pave new ways in robotic harvesting. This paper outlines the design and implementation of a bimanual UAV that employs visual perception and learning to autonomously detect avocados, reach, and harvest them. The dual-arm system comprises a gripper and a fixer arm, to address a key challenge when harvesting avocados: once grasped, a rotational motion is the most efficient way to detach the avocado from the peduncle; however, the peduncle may store elastic energy preventing the avocado from being harvested. The fixer arm aims to stabilize the peduncle, allowing the gripper arm to harvest. The integrated visual perception process enables the detection of avocados and the determination of their pose; the latter is then used to determine target points for a bimanual manipulation planner. Several experiments are conducted to assess the efficacy of each component, and integrated experiments assess the effectiveness of the system.

Read more

8/20/2024

Compact robotic gripper with tandem actuation for selective fruit harvesting
Total Score

0

Compact robotic gripper with tandem actuation for selective fruit harvesting

Alejandro Velasquez, Cindy Grimm, Joseph R. Davidson

Selective fruit harvesting is a challenging manipulation problem due to occlusions and clutter arising from plant foliage. A harvesting gripper should i) have a small cross-section, to avoid collisions while approaching the fruit; ii) have a soft and compliant grasp to adapt to different fruit geometry and avoid bruising it; and iii) be capable of rigidly holding the fruit tightly enough to counteract detachment forces. Previous work on fruit harvesting has primarily focused on using grippers with a single actuation mode, either suction or fingers. In this paper we present a compact robotic gripper that combines the benefits of both. The gripper first uses an array of compliant suction cups to gently attach to the fruit. After attachment, telescoping cam-driven fingers deploy, sweeping obstacles away before pivoting inwards to provide a secure grip on the fruit for picking. We present and analyze the finger design for both ability to sweep clutter and maintain a tight grasp. Specifically, we use a motorized test bed to measure grasp strength for each actuation mode (suction, fingers, or both). We apply a tensile force at different angles (0{deg}, 15{deg}, 30{deg} and 45{deg}), and vary the point of contact between the fingers and the fruit. We observed that with both modes the grasp strength is approximately 40 N. We use an apple proxy to test the gripper's ability to obtain a grasp in the presence of occluding apples and leaves, achieving a grasp success rate over 96% (with an ideal controller). Finally, we validate our gripper in a commercial apple orchard.

Read more

8/14/2024

🛸

Total Score

0

AHPPEBot: Autonomous Robot for Tomato Harvesting based on Phenotyping and Pose Estimation

Xingxu Li, Nan Ma, Yiheng Han, Shun Yang, Siyi Zheng

To address the limitations inherent to conventional automated harvesting robots specifically their suboptimal success rates and risk of crop damage, we design a novel bot named AHPPEBot which is capable of autonomous harvesting based on crop phenotyping and pose estimation. Specifically, In phenotyping, the detection, association, and maturity estimation of tomato trusses and individual fruits are accomplished through a multi-task YOLOv5 model coupled with a detection-based adaptive DBScan clustering algorithm. In pose estimation, we employ a deep learning model to predict seven semantic keypoints on the pedicel. These keypoints assist in the robot's path planning, minimize target contact, and facilitate the use of our specialized end effector for harvesting. In autonomous tomato harvesting experiments conducted in commercial greenhouses, our proposed robot achieved a harvesting success rate of 86.67%, with an average successful harvest time of 32.46 s, showcasing its continuous and robust harvesting capabilities. The result underscores the potential of harvesting robots to bridge the labor gap in agriculture.

Read more

5/14/2024