AHPPEBot: Autonomous Robot for Tomato Harvesting based on Phenotyping and Pose Estimation
0
🛸
Sign in to get full access
Overview
- Addresses limitations of conventional automated harvesting robots, including suboptimal success rates and crop damage
- Introduces a novel robot named AHPPEBot that can autonomously harvest crops using crop phenotyping and pose estimation
Plain English Explanation
The researchers have developed a new robot, called AHPPEBot, that can automatically harvest crops more effectively than traditional harvesting robots. Conventional robots often struggle to successfully pick crops without damaging them, but this new robot uses advanced computer vision and machine learning techniques to overcome those challenges.
The robot first uses a multi-task YOLOv5 model and a special clustering algorithm to detect and identify tomato trusses (the clusters of tomatoes on the plant) and individual tomatoes, as well as estimate their maturity. This "phenotyping" allows the robot to locate the ripe tomatoes it should target for harvesting.
Next, the robot employs a deep learning model to predict the position of seven key points on the stem (called the "pedicel") of each tomato. Knowing the exact location of these points helps the robot plan its path to the tomato and pick it without damaging the plant. The robot's specialized end effector, designed for this task, then carefully harvests the tomato.
In tests in commercial greenhouses, this AHPPEBot was able to successfully harvest tomatoes 86.67% of the time, with an average harvest time of just 32.46 seconds per tomato. This shows the potential for harvesting robots like this to help address labor shortages in agricultural settings.
Technical Explanation
To address the limitations of conventional automated harvesting robots, such as their suboptimal success rates and risk of crop damage, the researchers designed a novel robot called AHPPEBot that can autonomously harvest crops using computer vision and machine learning techniques.
In the
For
In autonomous tomato harvesting experiments conducted in commercial greenhouses, the AHPPEBot achieved a harvesting success rate of 86.67%, with an average successful harvest time of 32.46 seconds per tomato. These results demonstrate the robot's continuous and robust harvesting capabilities, underscoring the potential for harvesting robots to help address labor shortages in agriculture.
Critical Analysis
The researchers have presented a promising approach to autonomous crop harvesting that addresses some of the key limitations of conventional harvesting robots. By incorporating advanced computer vision and machine learning techniques, the AHPPEBot is able to achieve a relatively high success rate in harvesting tomatoes without causing significant damage to the plants.
However, the paper does not discuss certain potential limitations or areas for further research. For example, the performance of the robot in different crop types, environmental conditions, or larger-scale operations is not explored. Additionally, the paper does not address potential issues around scalability, cost-effectiveness, or integration with existing agricultural infrastructure.
It would also be valuable to see the researchers discuss any ethical or societal implications of deploying such harvesting robots, such as their impact on agricultural labor or potential concerns around data privacy and autonomy. Lessons from deploying CropFollow under canopy in agricultural settings may provide useful insights in this regard.
Overall, the AHPPEBot represents an exciting advancement in the field of autonomous crop harvesting, and the researchers have demonstrated its technical capabilities through rigorous experimentation. However, further research and careful consideration of the broader implications of such technologies will be crucial as they are developed and deployed in real-world agricultural settings.
Conclusion
The researchers have designed a novel harvesting robot called AHPPEBot that can autonomously harvest crops, such as tomatoes, with a high success rate and minimal damage to the plants. By leveraging advanced computer vision and machine learning techniques, including crop phenotyping and pose estimation, the robot is able to locate and precisely harvest ripe fruits without causing harm to the plant.
The successful results of the AHPPEBot in commercial greenhouse experiments, with an 86.67% harvesting success rate and an average harvest time of just 32.46 seconds per tomato, suggest that this technology has the potential to help address labor shortages in the agricultural sector. As the development of autonomous ground mobile robots for terrestrial laser scanning and other agricultural applications continues to advance, solutions like the AHPPEBot may play an increasingly important role in the future of sustainable and efficient food production.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🛸
0
AHPPEBot: Autonomous Robot for Tomato Harvesting based on Phenotyping and Pose Estimation
Xingxu Li, Nan Ma, Yiheng Han, Shun Yang, Siyi Zheng
To address the limitations inherent to conventional automated harvesting robots specifically their suboptimal success rates and risk of crop damage, we design a novel bot named AHPPEBot which is capable of autonomous harvesting based on crop phenotyping and pose estimation. Specifically, In phenotyping, the detection, association, and maturity estimation of tomato trusses and individual fruits are accomplished through a multi-task YOLOv5 model coupled with a detection-based adaptive DBScan clustering algorithm. In pose estimation, we employ a deep learning model to predict seven semantic keypoints on the pedicel. These keypoints assist in the robot's path planning, minimize target contact, and facilitate the use of our specialized end effector for harvesting. In autonomous tomato harvesting experiments conducted in commercial greenhouses, our proposed robot achieved a harvesting success rate of 86.67%, with an average successful harvest time of 32.46 s, showcasing its continuous and robust harvesting capabilities. The result underscores the potential of harvesting robots to bridge the labor gap in agriculture.
Read more5/14/2024
0
Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots
Zhichao Liu, Jingzong Zhou, Konstantinos Karydis
This paper addresses the challenge of developing a multi-arm quadrupedal robot capable of efficiently harvesting fruit in complex, natural environments. To overcome the inherent limitations of traditional bimanual manipulation, we introduce the first three-arm quadrupedal robot LocoHarv-3 and propose a novel hierarchical tri-manual planning approach, enabling automated fruit harvesting with collision-free trajectories. Our comprehensive semi-autonomous framework integrates teleoperation, supported by LiDAR-based odometry and mapping, with learning-based visual perception for accurate fruit detection and pose estimation. Validation is conducted through a series of controlled indoor experiments using motion capture and extensive field tests in natural settings. Results demonstrate a 90% success rate in in-lab settings with a single attempt, and field trials further verify the system's robustness and efficiency in more challenging real-world environments.
Read more9/26/2024
0
A Ground Mobile Robot for Autonomous Terrestrial Laser Scanning-Based Field Phenotyping
Javier Rodriguez-Sanchez, Kyle Johnsen, Changying Li
Traditional field phenotyping methods are often manual, time-consuming, and destructive, posing a challenge for breeding progress. To address this bottleneck, robotics and automation technologies offer efficient sensing tools to monitor field evolution and crop development throughout the season. This study aimed to develop an autonomous ground robotic system for LiDAR-based field phenotyping in plant breeding trials. A Husky platform was equipped with a high-resolution three-dimensional (3D) laser scanner to collect in-field terrestrial laser scanning (TLS) data without human intervention. To automate the TLS process, a 3D ray casting analysis was implemented for optimal TLS site planning, and a route optimization algorithm was utilized to minimize travel distance during data collection. The platform was deployed in two cotton breeding fields for evaluation, where it autonomously collected TLS data. The system provided accurate pose information through RTK-GNSS positioning and sensor fusion techniques, with average errors of less than 0.6 cm for location and 0.38$^{circ}$ for heading. The achieved localization accuracy allowed point cloud registration with mean point errors of approximately 2 cm, comparable to traditional TLS methods that rely on artificial targets and manual sensor deployment. This work presents an autonomous phenotyping platform that facilitates the quantitative assessment of plant traits under field conditions of both large agricultural fields and small breeding trials to contribute to the advancement of plant phenomics and breeding programs.
Read more4/9/2024
0
Vision-assisted Avocado Harvesting with Aerial Bimanual Manipulation
Zhichao Liu, Jingzong Zhou, Caio Mucchiani, Konstantinos Karydis
Robotic fruit harvesting holds potential in precision agriculture to improve harvesting efficiency. While ground mobile robots are mostly employed in fruit harvesting, certain crops, like avocado trees, cannot be harvested efficiently from the ground alone. This is because of unstructured ground and planting arrangement and high-to-reach fruits. In such cases, aerial robots integrated with manipulation capabilities can pave new ways in robotic harvesting. This paper outlines the design and implementation of a bimanual UAV that employs visual perception and learning to autonomously detect avocados, reach, and harvest them. The dual-arm system comprises a gripper and a fixer arm, to address a key challenge when harvesting avocados: once grasped, a rotational motion is the most efficient way to detach the avocado from the peduncle; however, the peduncle may store elastic energy preventing the avocado from being harvested. The fixer arm aims to stabilize the peduncle, allowing the gripper arm to harvest. The integrated visual perception process enables the detection of avocados and the determination of their pose; the latter is then used to determine target points for a bimanual manipulation planner. Several experiments are conducted to assess the efficacy of each component, and integrated experiments assess the effectiveness of the system.
Read more8/20/2024