Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step
0
🚀
Sign in to get full access
Overview
- Bio-inspired soft robots can adapt to uncertain and unstructured environments, but their development is often time-consuming and costly.
- This paper proposes an integrated approach to designing and fabricating pneumatic soft actuators in a single casting step.
- Fused filament fabrication (FFF) is used to print molds and sacrificial water-soluble hollow cores, which are then dissolved to create the actuator.
- This enables the fabrication of actuators with non-uniform cross-sections under minimal supervision, reducing the number of design and fabrication iterations.
- Three different bio-inspired soft robots were designed, fabricated, and demonstrated using this method.
Plain English Explanation
Soft robots inspired by nature have shown the ability to handle uncertainty and adapt to messy, unstructured environments. However, creating these robots is often a slow and expensive process, requiring a lot of hands-on work and repeated testing.
This paper presents a new way to design and build soft pneumatic actuators - the key components that make soft robots move. The researchers use a 3D printing technique called fused filament fabrication (FFF) to create custom molds and removable inner cores. They then pour in a soft, flexible material to create the actuator. The inner core can be dissolved away, leaving behind a hollow actuator with a unique shape.
This process allows for the fabrication of actuators with more complex, non-uniform cross-sections, which can enable more diverse and capable movements. It also requires less hands-on work and trial-and-error, since the actuator designs are first tested virtually using computer simulations.
The researchers demonstrate this approach by designing and building three different bio-inspired soft robots: an earthworm-inspired robot, a four-legged robot, and a robotic gripper. These robots show the versatility and effectiveness of the new fabrication method.
Technical Explanation
The key innovation in this paper is an integrated approach to the design and fabrication of pneumatic soft actuators. The researchers use fused filament fabrication (FFF) 3D printing to create custom molds and sacrificial water-soluble inner cores. These cores are then dissolved away after the actuator material is poured in, leaving behind a hollow actuator with a precisely defined shape.
This process allows for the fabrication of actuators with non-uniform cross-sections, which can enable more complex and capable motions compared to traditional straight-walled actuators. The actuator designs are first simulated using finite element analysis (FEA) to optimize their mechanical properties and performance.
The researchers demonstrate the effectiveness of their approach by designing, fabricating, and testing three different soft robot prototypes: an earthworm-inspired robot, a four-legged robot, and a robotic gripper. These robots showcase the versatility of the fabrication method and its ability to accelerate the development of bio-inspired soft robotics.
Critical Analysis
The integrated design and fabrication approach presented in this paper represents a valuable contribution to the field of soft robotics. By reducing the time and effort required to develop new actuators and robots, it has the potential to significantly increase the accessibility of this technology.
However, the paper does not address some potential limitations of the approach. For example, the dissolution of the water-soluble cores may not be scalable to larger or more complex actuator geometries, and the reliance on FFF 3D printing could limit the choice of materials or surface finishes.
Additionally, the paper does not provide a comprehensive comparison of the performance, reliability, or durability of the actuators fabricated using this method compared to other soft robotics techniques, such as those using ring-shaped actuators or underactuated control systems. Further testing and evaluation would be necessary to fully assess the strengths and limitations of this approach.
Conclusion
This paper presents an innovative integrated approach to the design and fabrication of pneumatic soft actuators, which are key components of bio-inspired soft robots. By leveraging 3D printing and FEA simulation, the researchers have developed a method that can reduce the time and effort required to create new soft robotic systems.
The successful demonstration of three different soft robot prototypes highlights the versatility and effectiveness of this fabrication technique. While there are some potential limitations that warrant further investigation, this work represents a significant step towards increasing the accessibility and adoption of soft robotics technology.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🚀
0
Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step
Afonso Silva, Diogo Fonseca, Diogo M. Neto, Mihail Babcinschi, Pedro Neto
Bio-inspired soft robots have already shown the ability to handle uncertainty and adapt to unstructured environments. However, their availability is partially restricted by time-consuming, costly and highly supervised design-fabrication processes, often based on resource intensive iterative workflows. Here, we propose an integrated approach targeting the design and fabrication of pneumatic soft actuators in a single casting step. Molds and sacrificial water-soluble hollow cores are printed using fused filament fabrication (FFF). A heated water circuit accelerates the dissolution of the core's material and guarantees its complete removal from the actuator walls, while the actuator's mechanical operability is defined through finite element analysis (FEA). This enables the fabrication of actuators with non-uniform cross sections under minimal supervision, thereby reducing the number of iterations necessary during the design and fabrication processes. Three actuators capable of bending and linear motion were designed, fabricated, integrated and demonstrated as three different bio-inspired soft robots, an earthworm-inspired robot, a four-legged robot, and a robotic gripper. We demonstrate the availability, versatility and effectiveness of the proposed methods, contributing to accelerating the design and fabrication of soft robots. This study represents a step toward increasing the accessibility of soft robots to people at a lower cost.
Read more7/19/2024
0
Vision-based FDM Printing for Fabricating Airtight Soft Actuators
Yijia Wu, Zilin Dai, Haotian Liu, Lehong Wang, Markus P. Nemitz
Pneumatic soft robots are typically fabricated by molding, a manual fabrication process that requires skilled labor. Additive manufacturing has the potential to break this limitation and speed up the fabrication process but struggles with consistently producing high-quality prints. We propose a low-cost approach to improve the print quality of desktop fused deposition modeling by adding a webcam to the printer to monitor the printing process and detect and correct defects such as holes or gaps. We demonstrate that our approach improves the air-tightness of printed pneumatic actuators without fine-tuning printing parameters. Our approach presents a new option for robustly fabricating airtight, soft robotic actuators.
Read more4/12/2024
0
Generative Design of Multimodal Soft Pneumatic Actuators
Saswath Ghosh, Sitikantha Roy
The recent advancements in machine learning techniques have steered us towards the data-driven design of products. Motivated by this objective, the present study proposes an automated design methodology that employs data-driven methods to generate new designs of soft actuators. One of the bottlenecks in the data-driven automated design process is having publicly available data to train the model. Due to its unavailability, a synthetic data set of soft pneumatic network (Pneu-net) actuators has been created. The parametric design data set for the training of the generative model is created using data augmentation. Next, the Gaussian mixture model has been applied to generate novel parametric designs of Pneu-net actuators. The distance-based metric defines the novelty and diversity of the generated designs. In addition, it is noteworthy that the model has the potential to generate a multimodal Pneu-net actuator that could perform in-plane bending and out-of-plane twisting. Later, the novel design is passed through finite element analysis to evaluate the quality of the generated design. Moreover, the trajectory of each category of Pneu-net actuators evaluates the performance of the generated Pneu-net actuators and emphasizes the necessity of multimodal actuation. The proposed model could accelerate the design of new soft robots by selecting a soft actuator from the developed novel pool of soft actuators.
Read more8/13/2024
0
SPONGE: Open-Source Designs of Modular Articulated Soft Robots
Tim-Lukas Habich, Jonas Haack, Mehdi Belhadj, Dustin Lehmann, Thomas Seel, Moritz Schappler
Soft-robot designs are manifold, but only a few are publicly available. Often, these are only briefly described in their publications. This complicates reproduction, and hinders the reproducibility and comparability of research results. If the designs were uniform and open source, validating researched methods on real benchmark systems would be possible. To address this, we present two variants of a soft pneumatic robot with antagonistic bellows as open source. Starting from a semi-modular design with multiple cables and tubes routed through the robot body, the transition to a fully modular robot with integrated microvalves and serial communication is highlighted. Modularity in terms of stackability, actuation, and communication is achieved, which is the crucial requirement for building soft robots with many degrees of freedom and high dexterity for real-world tasks. Both systems are compared regarding their respective advantages and disadvantages. The robots' functionality is demonstrated in experiments on airtightness, gravitational influence, position control with mean tracking errors of <3 deg, and long-term operation of cast and printed bellows. All soft- and hardware files required for reproduction are provided.
Read more4/17/2024