An iterative closest point algorithm for marker-free 3D shape registration of continuum robots
0
🔍
Sign in to get full access
Overview
- Continuum robots are a promising technology for medical applications due to their ability to access deep parts of the body with minimal surgical trauma.
- Accurately measuring the complex shapes of these robots is a significant challenge when developing physics-based models.
- This paper presents an optimization-based 3D shape registration algorithm to estimate the backbone shape of slender continuum robots using photogrammetric measurement.
Plain English Explanation
Continuum robots are a type of flexible robot that can bend and twist, allowing them to access hard-to-reach areas inside the human body with less invasive surgery. When designing these robots, researchers need to create mathematical models to understand how they move and behave. However, it's very difficult to accurately measure the complex, curving shapes of continuum robots, which is necessary to validate these models.
This research proposes a new method to estimate the shape of the central "backbone" of a continuum robot using photographs. The algorithm takes 2D images of the robot and fits a 3D curve to optimally match the shape shown in the photos. It does this without needing to know the exact position of the robot in the images ahead of time.
The researchers tested this approach on both simulated and real images of a specific type of continuum robot called a "concentric tube" robot. They found that their algorithm could reconstruct the robot's shape with an average error of less than 1 millimeter compared to the actual robot and the computer simulations. This shows that this photogrammetry-based approach can provide highly accurate measurements of continuum robot shapes, which is crucial for developing reliable physics-based models of their behavior.
Technical Explanation
The core of this work is an optimization-based 3D shape registration algorithm that estimates the backbone shape of slender continuum robots from photographic images. The algorithm fits a parametric 3D curve to the robot's shape visible in the 2D images.
To do this, the method incorporates an iterative closest point (ICP) algorithm, which allows it to estimate the robot's position within the images without needing that information a priori. The optimization process adjusts the parameters of the 3D curve model to minimized the distance between the projected curve and the observed robot shape in the images.
The researchers evaluated this approach using both synthetic images generated from simulations, as well as real photographs of a concentric tube continuum robot. Compared to the simulated ground truth, the reconstruction had an average maximum deviation of 0.665 mm. For the real robot, the average maximum deviation from manual measurements was 0.939 mm.
These results demonstrate that this optimization-based 3D shape registration technique can accurately estimate the backbone shape of continuum robots from photographic data alone, without requiring complex shape sensing hardware. This is a important capability for developing reliable physics-based models and enabling robust point cloud registration of these flexible, dexterous robot systems.
Critical Analysis
The paper presents a well-designed study that validates the effectiveness of the proposed 3D shape registration algorithm on both simulated and real continuum robot data. The use of the iterative closest point method is a clever approach that avoids the need for prior knowledge of the robot's position in the images.
However, the experiments are limited to a single type of continuum robot - the concentric tube design. While this is a common and relevant example, it would be helpful to see the algorithm's performance evaluated on a broader range of continuum robot platforms and morphologies. Additionally, the analysis of real-world measurement errors could be expanded to better understand the practical limitations and sources of inaccuracy.
Further research could also explore integrating this shape estimation technique with other modular frameworks for autonomous map merging or deep learning-based point cloud registration to enable more comprehensive 3D perception and modeling of continuum robot systems. Exploring the potential for continuous spatial-temporal deformable image registration could also enhance the algorithm's ability to track dynamic robot shapes over time.
Overall, this paper makes a valuable contribution by demonstrating an effective approach to a challenging measurement problem for continuum robots. The results highlight the potential for photogrammetry-based shape estimation to support the development of these promising medical technologies.
Conclusion
This research presents an optimization-based 3D shape registration algorithm that can accurately estimate the backbone shape of slender continuum robots from photographic images alone. By incorporating an iterative closest point method, the algorithm can reconstruct the robot's shape without requiring prior knowledge of its position in the images.
Evaluated on both simulated and real-world data for a concentric tube continuum robot, the approach demonstrated average maximum reconstruction errors of less than 1 millimeter. These results validate the algorithm's ability to provide high-accuracy 3D shape measurements, which is crucial for developing reliable physics-based models and enabling advanced control of these flexible, dexterous robotic systems.
Overall, this work represents an important step forward in the photogrammetric measurement and modeling of continuum robots, with promising implications for their continued advancement and application in the medical field.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🔍
0
An iterative closest point algorithm for marker-free 3D shape registration of continuum robots
Matthias K. Hoffmann, Julian Muhlenhoff, Zhaoheng Ding, Thomas Sattel, Kathrin Fla{ss}kamp
Continuum robots have emerged as a promising technology in the medical field due to their potential of accessing deep sited locations of the human body with low surgical trauma. When deriving physics-based models for these robots, evaluating the models poses a significant challenge due to the difficulty in accurately measuring their intricate shapes. In this work, we present an optimization based 3D shape registration algorithm for estimation of the backbone shape of slender continuum robots as part of a pho togrammetric measurement. Our approach to estimating the backbones optimally matches a parametric three-dimensional curve to images of the robot. Since we incorporate an iterative closest point algorithm into our method, we do not need prior knowledge of the robots position within the respective images. In our experiments with artificial and real images of a concentric tube continuum robot, we found an average maximum deviation of the reconstruction from simulation data of 0.665 mm and 0.939 mm from manual measurements. These results show that our algorithm is well capable of producing high accuracy positional data from images of continuum robots.
Read more5/27/2024
0
Three-dimensional Morphological Reconstruction of Millimeter-Scale Soft Continuum Robots based on Dual-Stereo-Vision
Tian-Ao Ren, Wenyan Liu, Tao Zhang, Lei Zhao, Hongliang Ren, Jiewen Lai
Continuum robots can be miniaturized to just a few millimeters in diameter. Among these, notched tubular continuum robots (NTCR) show great potential in many delicate applications. Existing works in robotic modeling focus on kinematics and dynamics but still face challenges in reproducing the robot's morphology -- a significant factor that can expand the research landscape of continuum robots, especially for those with asymmetric continuum structures. This paper proposes a dual stereo vision-based method for the three-dimensional morphological reconstruction of millimeter-scale NTCRs. The method employs two oppositely located stationary binocular cameras to capture the point cloud of the NTCR, then utilizes predefined geometry as a reference for the KD tree method to relocate the capture point clouds, resulting in a morphologically correct NTCR despite the low-quality raw point cloud collection. The method has been proved feasible for an NTCR with a 3.5 mm diameter, capturing 14 out of 16 notch features, with the measurements generally centered around the standard of 1.5 mm, demonstrating the capability of revealing morphological details. Our proposed method paves the way for 3D morphological reconstruction of millimeter-scale soft robots for further self-modeling study.
Read more8/19/2024
👨🏫
0
Efficient and Deterministic Search Strategy Based on Residual Projections for Point Cloud Registration with Correspondences
Xinyi Li, Hu Cao, Yinlong Liu, Xueli Liu, Feihu Zhang, Alois Knoll
Estimating the rigid transformation between two LiDAR scans through putative 3D correspondences is a typical point cloud registration paradigm. Current 3D feature matching approaches commonly lead to numerous outlier correspondences, making outlier-robust registration techniques indispensable. Many recent studies have adopted the branch and bound (BnB) optimization framework to solve the correspondence-based point cloud registration problem globally and deterministically. Nonetheless, BnB-based methods are time-consuming to search the entire 6-dimensional parameter space, since their computational complexity is exponential to the solution domain dimension in the worst-case. To enhance algorithm efficiency, existing works attempt to decouple the 6 degrees of freedom (DOF) original problem into two 3-DOF sub-problems, thereby reducing the search space. In contrast, our approach introduces a novel pose decoupling strategy based on residual projections, decomposing the raw registration problem into three sub-problems. Subsequently, we embed interval stabbing into BnB to solve these sub-problems within a lower two-dimensional domain, resulting in efficient and deterministic registration. Moreover, our method can be adapted to address the challenging problem of simultaneous pose and registration. Through comprehensive experiments conducted on challenging synthetic and real-world datasets, we demonstrate that the proposed method outperforms state-of-the-art methods in terms of efficiency while maintaining comparable robustness.
Read more5/14/2024
🤷
0
An Optimization-based Baseline for Rigid 2D/3D Registration Applied to Spine Surgical Navigation Using CMA-ES
Minheng Chen, Tonglong Li, Zhirun Zhang, Youyong Kong
A robust and efficient optimization-based 2D/3D registration framework is crucial for the navigation system of orthopedic surgical robots. It can provide precise position information of surgical instruments and implants during surgery. While artificial intelligence technology has advanced rapidly in recent years, traditional optimization-based registration methods remain indispensable in the field of 2D/3D registration.he exceptional precision of this method enables it to be considered as a post-processing step of the learning-based methods, thereby offering a reliable assurance for registration. In this paper, we present a coarse-to-fine registration framework based on the CMA-ES algorithm. We conducted intensive testing of our method using data from different parts of the spine. The results shows the effectiveness of the proposed framework on real orthopedic spine surgery clinical data. This work can be viewed as an additional extension that complements the optimization-based methods employed in our previous studies.
Read more8/20/2024