Learned Pulse Shaping Design for PAPR Reduction in DFT-s-OFDM

Overview

• High peak-to-average power ratio (PAPR) is a major challenge in cellular systems, especially in the uplink direction.
• Discrete Fourier transform spread orthogonal frequency-domain multiplexing (DFT-s-OFDM) with spectrally-extended frequency-domain spectrum shaping (FDSS) is a technique used to lower the PAPR of uplink waveforms.
• This work proposes a machine learning-based framework to determine the FDSS filter, optimizing a tradeoff between symbol error rate (SER), PAPR, and spectral flatness requirements.

Plain English Explanation

In cellular communication networks, there is a challenge called high peak-to-average power ratio (PAPR). This means that the signals being transmitted can have very high peaks compared to the average power, which can limit the coverage area of the cellular system, especially for signals being sent from the user's device to the cell tower (the "uplink" direction).

One technique that has been used to address this PAPR problem is called DFT-s-OFDM with spectrally-extended frequency-domain spectrum shaping (FDSS). This method tries to shape the frequency spectrum of the transmitted signal in a way that reduces the PAPR.

In this paper, the researchers propose using a machine learning-based approach to determine the best way to apply this FDSS technique. Their framework optimizes a tradeoff between three important factors: the symbol error rate (how many transmission errors occur), the PAPR (the peak-to-average power ratio), and the spectral flatness (how evenly the signal is distributed across the frequency spectrum).

The key idea is to use machine learning to automatically find the best FDSS filter settings to balance these three competing requirements, rather than relying on manual tuning. The results show that this learned FDSS filter can reduce the PAPR compared to conventional methods, while only causing a minimal increase in transmission errors.

Technical Explanation

The paper proposes an end-to-end optimization framework that uses machine learning to determine the FDSS filter for DFT-s-OFDM waveforms. This optimization considers multiple important design constraints, including the Nyquist zero-ISI (inter-symbol interference) condition.

The framework aims to find the FDSS filter that provides the best tradeoff between three key metrics: symbol error rate (SER), peak-to-average power ratio (PAPR), and spectral flatness. This is done through an end-to-end optimization process that directly learns the FDSS filter parameters.

The numerical results show that the learned FDSS filters are able to lower the PAPR compared to conventional baselines, while only incurring a minimal increase in SER. By tuning the parameters of the optimization, the authors are also able to gain insights into the fundamental limitations and characteristics of the FDSS filters for PAPR reduction.

Critical Analysis

The paper presents a promising machine learning-based approach for optimizing FDSS filters to reduce PAPR in DFT-s-OFDM waveforms. However, the authors acknowledge that their framework only considers additive white Gaussian noise (AWGN) channels, and further research is needed to evaluate its performance in more realistic wireless channel conditions, such as multipath fading or carrier frequency offsets.

Additionally, the paper does not provide a comprehensive analysis of the computational complexity or training time required for the proposed machine learning-based optimization. This information would be valuable for assessing the practical feasibility of deploying such a system in real-world 5G or future cellular networks.

Conclusion

This research proposes an innovative machine learning-based framework for optimizing the FDSS filter in DFT-s-OFDM systems to reduce the high PAPR problem, which is a key challenge in cellular uplink communications. The results demonstrate that the learned FDSS filters can lower the PAPR with minimal impact on the symbol error rate, suggesting this approach could be a useful technique for improving the coverage and efficiency of future cellular networks.