Trainable Least Squares to Reduce PAPR in OFDM-based Hybrid Beamforming Systems
0
Sign in to get full access
Overview
- This paper proposes a trainable least squares method to reduce the peak-to-average power ratio (PAPR) in OFDM-based hybrid beamforming systems.
- The research was conducted at Skoltech and funded by the Russian Science Foundation.
- The method aims to improve the efficiency and performance of OFDM communication systems using hybrid beamforming architectures.
Plain English Explanation
OFDM (Orthogonal Frequency Division Multiplexing) is a widely used technique in modern communication systems, such as WiFi and 5G. One challenge with OFDM is the high PAPR, which can lead to signal distortion and reduced energy efficiency.
Hybrid beamforming is a approach that combines analog and digital signal processing to improve the performance of OFDM systems. However, the high PAPR can still be a problem in these hybrid architectures.
The researchers in this paper propose a trainable least squares method to reduce the PAPR in OFDM-based hybrid beamforming systems. The key idea is to use machine learning techniques to optimize the beamforming weights and reduce the PAPR, without significantly impacting the system's performance.
By reducing the PAPR, the communication system can operate more efficiently, with less signal distortion and power consumption. This can lead to improved battery life, coverage, and overall system performance in applications like 5G and IoT.
Technical Explanation
The paper first provides background on PAPR reduction methods for OFDM systems, including clipping, coding, and tone reservation techniques. It then discusses the challenges of PAPR reduction in hybrid beamforming architectures.
The proposed approach uses a trainable least squares (TLS) algorithm to optimize the beamforming weights and reduce the PAPR. The TLS method is formulated as an optimization problem, where the objective is to minimize the PAPR while maintaining the desired signal quality.
The paper describes the TLS algorithm in detail, including the mathematical formulation and the training process. The authors also present an efficient implementation of the TLS algorithm using a neural network-based approach.
The performance of the proposed TLS-based PAPR reduction method is evaluated through simulations and compared to traditional PAPR reduction techniques. The results show that the TLS method can achieve significant PAPR reduction with minimal impact on the system's bit error rate and spectral efficiency.
Critical Analysis
The paper provides a well-designed and thorough investigation of the proposed TLS-based PAPR reduction method for OFDM-based hybrid beamforming systems. The authors have carefully considered the relevant background, formulated the problem, and presented a novel solution.
One potential limitation of the study is the reliance on simulations, as the performance of the TLS method in real-world scenarios may be influenced by factors not captured in the simulations. It would be valuable to see the method evaluated in practical implementations or field trials.
Additionally, the paper does not discuss the computational complexity or the training time required for the TLS algorithm, which could be important considerations for practical deployment, especially in resource-constrained IoT or mobile devices.
Further research could also explore the robustness of the TLS method to imperfections in the hybrid beamforming hardware, such as phase noise or analog component nonlinearities, and its performance under different channel conditions or user mobility scenarios.
Conclusion
This paper presents a trainable least squares method to effectively reduce the PAPR in OFDM-based hybrid beamforming systems. The proposed approach leverages machine learning techniques to optimize the beamforming weights and achieve significant PAPR reduction without compromising the system's performance.
The TLS-based PAPR reduction method has the potential to improve the energy efficiency and overall performance of 5G and other OFDM-based communication systems, especially in applications that require high data rates and energy-constrained environments. The research demonstrates the value of combining advanced signal processing and machine learning techniques to address challenging problems in modern wireless communications.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Trainable Least Squares to Reduce PAPR in OFDM-based Hybrid Beamforming Systems
Andrey Ivanov, Alexander Osinsky, Roman Bychkov, Vladimir Kalinin, Dmitry Lakontsev
In this paper, we propose a trainable least squares (LS) approach for reducing the peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals in a hybrid beamforming (HBF) system. Compared to digital beamforming (DBF), in HBF technology the number of antennas exceeds the number of digital ports. Therefore, PAPR reduction capabilities are restricted by both a limited bandwidth and the reduced size of digital space. The problem is to meet both conditions. Moreover, the major HBF advantage is a reduced system complexity, thus the complexity of the PAPR reduction algorithm is expected to be low. To justify the performance of the proposed trainable LS, we provide a performance bound achieved by convex optimization using the CVX Matlab package. Moreover, the complexity of the proposed algorithm can be comparable to the minimal complexity of the digital ``twin'' calculation in HBF. The abovementioned features prove the feasibility of the trained LS for PAPR reduction in fully-connected HBF.
Read more4/4/2024
➖
0
Learned Pulse Shaping Design for PAPR Reduction in DFT-s-OFDM
Fabrizio Carpi, Soheil Rostami, Joonyoung Cho, Siddharth Garg, Elza Erkip, Charlie Jianzhong Zhang
High peak-to-average power ratio (PAPR) is one of the main factors limiting cell coverage for cellular systems, especially in the uplink direction. Discrete Fourier transform spread orthogonal frequency-domain multiplexing (DFT-s-OFDM) with spectrally-extended frequency-domain spectrum shaping (FDSS) is one of the efficient techniques deployed to lower the PAPR of the uplink waveforms. In this work, we propose a machine learning-based framework to determine the FDSS filter, optimizing a tradeoff between the symbol error rate (SER), the PAPR, and the spectral flatness requirements. Our end-to-end optimization framework considers multiple important design constraints, including the Nyquist zero-ISI (inter-symbol interference) condition. The numerical results show that learned FDSS filters lower the PAPR compared to conventional baselines, with minimal SER degradation. Tuning the parameters of the optimization also helps us understand the fundamental limitations and characteristics of the FDSS filters for PAPR reduction.
Read more4/26/2024
0
Rapid and Power-Aware Learned Optimization for Modular Receive Beamforming
Ohad Levy, Nir Shlezinger
Multiple-input multiple-output (MIMO) systems play a key role in wireless communication technologies. A widely considered approach to realize scalable MIMO systems involves architectures comprised of multiple separate modules, each with its own beamforming capability. Such models accommodate cell-free massive MIMO and partially connected hybrid MIMO architectures. A core issue with the implementation of modular MIMO arises from the need to rapidly set the beampatterns of the modules, while maintaining their power efficiency. This leads to challenging constrained optimization that should be repeatedly solved on each coherence duration. In this work, we propose a power-oriented optimization algorithm for beamforming in uplink modular hybrid MIMO systems, which learns from data to operate rapidly. We derive our learned optimizer by tackling the rate maximization objective using projected gradient ascent steps with momentum. We then leverage data to tune the hyperparameters of the optimizer, allowing it to operate reliably in a fixed and small number of iterations while completely preserving its interpretable operation. We show how power efficient beamforming can be encouraged by the learned optimizer, via boosting architectures with low-resolution phase shifts and with deactivated analog components. Numerical results show that our learn-to-optimize method notably reduces the number of iterations and computation latency required to reliably tune modular MIMO receivers, and that it allows obtaining desirable balances between power efficient designs and throughput.
Read more8/2/2024
0
Deep Learning Based Joint Multi-User MISO Power Allocation and Beamforming Design
Cemil Vahapoglu, Timothy J. O'Shea, Tamoghna Roy, Sennur Ulukus
The evolution of fifth generation (5G) wireless communication networks has led to an increased need for wireless resource management solutions that provide higher data rates, wide coverage, low latency, and power efficiency. Yet, many of existing traditional approaches remain non-practical due to computational limitations, and unrealistic presumptions of static network conditions and algorithm initialization dependencies. This creates an important gap between theoretical analysis and real-time processing of algorithms. To bridge this gap, deep learning based techniques offer promising solutions with their representational capabilities for universal function approximation. We propose a novel unsupervised deep learning based joint power allocation and beamforming design for multi-user multiple-input single-output (MU-MISO) system. The objective is to enhance the spectral efficiency by maximizing the sum-rate with the proposed joint design framework, NNBF-P while also offering computationally efficient solution in contrast to conventional approaches. We conduct experiments for diverse settings to compare the performance of NNBF-P with zero-forcing beamforming (ZFBF), minimum mean square error (MMSE) beamforming, and NNBF, which is also our deep learning based beamforming design without joint power allocation scheme. Experiment results demonstrate the superiority of NNBF-P compared to ZFBF, and MMSE while NNBF can have lower performances than MMSE and ZFBF in some experiment settings. It can also demonstrate the effectiveness of joint design framework with respect to NNBF.
Read more6/13/2024