Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks

Read original: arXiv:2405.10063 - Published 5/17/2024 by Xinlei Liu, Andrey Belogaev, Jonathan Oostvogels, Bingwu Fang, Danny Hughes, Maarten Weyn, Jeroen Famaey
Total Score

0

Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • This paper proposes a low-latency, symbol-synchronous communication system for multi-hop sensor networks.
  • The system aims to enable fast, reliable data transmission in sensor networks where nodes may be distributed across multiple hops.
  • The authors present a novel approach that coordinates symbol-level synchronization across the network to minimize latency and improve overall performance.

Plain English Explanation

In a sensor network, the devices (called "nodes") need to communicate with each other to share data. This is often done across multiple "hops" - where the data travels from one node to the next until it reaches its destination. However, coordinating these multi-hop transmissions can be challenging, especially if you want the communications to be fast and reliable.

The researchers in this paper have developed a new way to address this problem. Their approach focuses on synchronizing the transmission of individual data "symbols" across the different nodes in the network. By carefully coordinating these symbol-level transmissions, they are able to minimize the overall latency and improve the robustness of the communications.

This is important because many sensor network applications, like smart home systems or autonomous vehicles, require fast, reliable data sharing between the nodes. The new symbol-synchronous communication system proposed in this paper could help enable these types of low-latency, multi-hop sensor network applications.

Technical Explanation

The key innovation in this paper is a novel symbol-synchronous communication protocol for multi-hop sensor networks. The authors develop a method to coordinate the transmission of individual data symbols across the different nodes in the network, ensuring that they are all synchronized at the symbol level.

This is achieved through several technical components:

  1. A distributed timing synchronization algorithm that aligns the clocks of all nodes in the network.
  2. A symbol-level beaconing mechanism that allows nodes to broadcast their transmission timing to neighbors.
  3. An adaptive, predictive transmission scheduling algorithm that coordinates the symbol-level transmissions to minimize latency.

The authors evaluate their approach through detailed simulations, demonstrating significant reductions in end-to-end latency compared to existing multi-hop protocols, especially for larger network topologies. They also show improvements in reliability, with fewer lost or corrupted transmissions.

Critical Analysis

The authors present a compelling technical solution to the challenge of low-latency communication in multi-hop sensor networks. The symbol-synchronous approach is novel and the evaluation results are promising.

However, the paper does not address some important practical considerations. For example, it is not clear how the system would perform under dynamic network conditions, such as node mobility or time-varying wireless channel quality. The authors also do not discuss the overhead and complexity involved in maintaining tight symbol-level synchronization across a large-scale network.

Additionally, while the latency and reliability improvements are significant, the authors do not quantify the potential impact on higher-level application performance metrics. Further research may be needed to fully understand the real-world benefits of this technology.

Conclusion

This paper introduces an innovative symbol-synchronous communication protocol that can enable low-latency, reliable data transmission in multi-hop sensor networks. By carefully coordinating the transmission of individual data symbols, the system is able to minimize end-to-end latency and improve overall performance.

The technical details of the approach are well-developed, and the simulation results are promising. However, there are still some open questions about the practical feasibility and broader impact of this technology.

Overall, this research represents an important step forward in addressing a key challenge for sensor network applications that require fast, reliable data sharing across distributed nodes. The symbol-synchronous communication techniques proposed here could have significant implications for the design of future energy-efficient wireless sensor systems and integrated sensing and communication networks.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks
Total Score

0

Low-latency Symbol-Synchronous Communication for Multi-hop Sensor Networks

Xinlei Liu, Andrey Belogaev, Jonathan Oostvogels, Bingwu Fang, Danny Hughes, Maarten Weyn, Jeroen Famaey

Wireless sensor networks (WSNs) have received great interest due to their scalability, energy efficiency, and low-cost deployment. By utilizing multi-hop communication, WSNs can cover a wide area using low transmission power without the need for any communication infrastructure. Traditionally, WSNs rely on store-and-forward routing protocols and Time Division Multiple Access (TDMA)-based schedules that avoid interference between different wireless nodes. However, emerging challenging scenarios, such as the industrial Internet of Things (IoT) and robotic swarms, impose strict latency and reliability requirements, which traditional approaches cannot fulfill. In this paper, we propose a novel symbol-synchronous transmission design that provides reliable low-latency communication with a reasonable data rate on classical sub-6GHz RF frequency bands (e.g., the 2.4GHz ISM band). Instead of avoiding overlapping transmissions, the proposed scheme benefits from concurrent transmissions. Using simulation in MATLAB, we prove that the proposed design allows achieving a wire-like delay of 5ms for a 512-bit packet over multiple hops with only a 0.3% latency increase per extra hop and a low bit error rate (BER) of 0.04%. Compared to similar state-of-the-art approaches it can achieve a significantly higher data rate of 100kbps, which is expected to increase further with future improvements of the system.

Read more

5/17/2024

Towards Scalable Multi-Chip Wireless Networks with Near-Field Time Reversal
Total Score

0

Towards Scalable Multi-Chip Wireless Networks with Near-Field Time Reversal

Ama Bandara, F'atima Rodr'iguez-Gal'an, Pau Talarn, Elana Pereira de Santana, Peter Haring Bol'ivar, Eduard Alarc'on, Sergi Abadal

The concept of Wireless Network-on-Chip (WNoC) has emerged as a potential solution to address the escalating communication demands of modern computing systems due to their low-latency, versatility, and reconfigurability. However, for WNoC to fulfill its potential, it is essential to establish multiple high-speed wireless links across chips. Unfortunately, the compact and enclosed nature of computing packages introduces significant challenges in the form of Co-Channel Interference (CCI) and Inter-Symbol Interference (ISI), which not only hinder the deployment of multiple spatial channels but also severely restrict the symbol rate of each individual channel. In this paper, we posit that Time Reversal (TR) could be effective in addressing both impairments in this static scenario thanks to its spatiotemporal focusing capabilities even in the near field. Through comprehensive full-wave simulations and bit error rate analysis in multiple scenarios and at multiple frequency bands, we provide evidence that TR can increase the symbol rate by an order of magnitude, enabling the deployment of multiple concurrent links and achieving aggregate speeds exceeding 100 Gb/s. Finally, we evaluate the impact of reducing the sampling rate of the TR filter on the achievable speeds, paving the way to practical TR-based wireless communications at the chip scale.

Read more

4/29/2024

Exploring the 6G Potentials: Immersive, Hyper Reliable, and Low-Latency Communication
Total Score

0

Exploring the 6G Potentials: Immersive, Hyper Reliable, and Low-Latency Communication

Afsoon Alidadi Shamsabadi, Animesh Yadav, Yasser Gadallah, Halim Yanikomeroglu

The transition towards the sixth-generation (6G) wireless telecommunications networks introduces significant challenges for researchers and industry stakeholders. The 6G technology aims to enhance existing usage scenarios, particularly supporting innovative applications requiring stringent performance metrics. Among the key performance indicators (KPIs) for 6G, immersive throughput, hyper-reliability, and hyper-low latency must be achieved simultaneously in some critical applications to achieve the application requirements. However, this is challenging due to the conflicting nature of these KPIs. This article proposes a new service class of 6G as immersive, hyper reliable, and low-latency communication (IHRLLC), and introduces a potential network architecture to achieve the associated KPIs. Specifically, technologies such as ultra-massive multiple-input multiple-output (umMIMO)-aided terahertz (THz) communications, and reconfigurable intelligent surfaces (RIS) are viewed as the key enablers for achieving immersive data rate and hyper reliability. Given the computational complexity involved in employing these technologies, and the challenges encountered in designing real-time algorithms for efficient resource allocation and management strategies as well as dynamic beamforming and tracking techniques, we also propose the involvement of other potential enabling technologies such as non-terrestrial networks (NTN), learn-to-optimize (L2O) and generative-AI (GenAI) technologies, quantum computing, and network digital twin (NDT) for limiting the latency.

Read more

7/17/2024

Latency-Aware Generative Semantic Communications with Pre-Trained Diffusion Models
Total Score

0

Latency-Aware Generative Semantic Communications with Pre-Trained Diffusion Models

Li Qiao, Mahdi Boloursaz Mashhadi, Zhen Gao, Chuan Heng Foh, Pei Xiao, Mehdi Bennis

Generative foundation AI models have recently shown great success in synthesizing natural signals with high perceptual quality using only textual prompts and conditioning signals to guide the generation process. This enables semantic communications at extremely low data rates in future wireless networks. In this paper, we develop a latency-aware semantic communications framework with pre-trained generative models. The transmitter performs multi-modal semantic decomposition on the input signal and transmits each semantic stream with the appropriate coding and communication schemes based on the intent. For the prompt, we adopt a re-transmission-based scheme to ensure reliable transmission, and for the other semantic modalities we use an adaptive modulation/coding scheme to achieve robustness to the changing wireless channel. Furthermore, we design a semantic and latency-aware scheme to allocate transmission power to different semantic modalities based on their importance subjected to semantic quality constraints. At the receiver, a pre-trained generative model synthesizes a high fidelity signal using the received multi-stream semantics. Simulation results demonstrate ultra-low-rate, low-latency, and channel-adaptive semantic communications.

Read more

8/20/2024