Non-Contact Breath Rate Classification Using SVM Model and mmWave Radar Sensor Data

Read original: arXiv:2407.13222 - Published 7/19/2024 by Mohammad Wassaf Ali, Ayushi Gupta, Mujeev Khan, Mohd Wajid
Total Score

0

🏷️

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • This paper explores the use of frequency modulated continuous wave (FMCW) radar technology combined with machine learning to differentiate between normal and abnormal breathing rates.
  • The proposed system collects data non-contactly using FMCW radar, which depends on breathing rates.
  • Various support vector machine (SVM) kernels are used to classify the observed data into normal and abnormal states.
  • The researchers report good accuracy in breath rate classification, with the best accuracy of 95% using the quadratic polynomial kernel with the smallest number of support vectors.

Plain English Explanation

The researchers have developed a system that can detect abnormal breathing patterns using radar technology and machine learning. Instead of requiring physical contact with the person, the system uses a special type of radar called FMCW radar to non-contactly measure the person's breathing rate. The researchers then used a machine learning algorithm called a support vector machine (SVM) to analyze the breathing data and classify it as either normal or abnormal. They tested different types of SVM models and found that the quadratic polynomial kernel performed the best, correctly identifying abnormal breathing 95% of the time using the fewest number of data points.

Technical Explanation

The researchers used FMCW radar to non-contactly collect data on breathing rates. FMCW radar works by transmitting a signal that sweeps through a range of frequencies and then analyzing the reflections to measure distance and movement. In this case, the reflected signals depend on the person's breathing, allowing the system to track breathing patterns.

The researchers then applied several SVM models to classify the breathing data into normal and abnormal states. SVMs are a type of machine learning algorithm that can identify patterns in data and assign it to different categories. The researchers tested linear, quadratic, and radial basis function (RBF) SVM kernels to see which one performed best at distinguishing normal from abnormal breathing.

The results showed that the quadratic polynomial kernel achieved the highest accuracy of 95% in classifying the breathing data, while using the fewest number of support vectors (the key data points used by the SVM to define the decision boundary). This suggests the quadratic SVM was able to most effectively capture the underlying patterns in the normal and abnormal breathing data.

Critical Analysis

The researchers provide a promising proof-of-concept for using FMCW radar and machine learning to non-contactly monitor breathing and detect abnormalities. The high classification accuracy, especially with the quadratic SVM, indicates the method has potential clinical applications for respiratory anomaly detection.

However, the paper does not address several important limitations. First, the experiments were conducted in a controlled lab setting, so the system's performance in real-world environments with more noise and variability is unclear. Additionally, the paper does not validate the system against gold-standard clinical measurements of breathing to confirm its medical accuracy and reliability.

Further research is needed to expand the model's capabilities beyond just classifying breathing as normal or abnormal. Developing the ability to detect specific respiratory conditions or track changes over time could make the technology more clinically useful for aiding dysphagia assessment or monitoring chronic respiratory diseases.

Conclusion

This paper demonstrates the potential of using FMCW radar and machine learning, specifically support vector machines, to non-contactly monitor and detect abnormal breathing patterns. The high classification accuracy, especially with the quadratic SVM model, suggests the technology could have important clinical applications for respiratory anomaly detection and monitoring. However, further research is needed to validate the system's performance in real-world settings and expand its capabilities for more granular respiratory analysis and disease detection.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

🏷️

Total Score

0

Non-Contact Breath Rate Classification Using SVM Model and mmWave Radar Sensor Data

Mohammad Wassaf Ali, Ayushi Gupta, Mujeev Khan, Mohd Wajid

This work presents the use of frequency modulated continuous wave (FMCW) radar technology combined with a machine learning model to differentiate between normal and abnormal breath rates. The proposed system non-contactly collects data using FMCW radar, which depends on breath rates. Various support vector machine kernels are used to classify the observed data into normal and abnormal states. Prolonged experiments show good accuracy in breath rate classification, confirming the model's efficacy. The best accuracy is 95 percent with the smallest number of support vectors in the case of the quadratic polynomial kernel.

Read more

7/19/2024

Total Score

0

Noncontact Respiratory Anomaly Detection Using Infrared Light-Wave Sensing

Md Zobaer Islam, Brenden Martin, Carly Gotcher, Tyler Martinez, John F. O'Hara, Sabit Ekin

Human respiratory rate and its pattern convey essential information about the physical and psychological states of the subject. Abnormal breathing can indicate fatal health issues leading to further diagnosis and treatment. Wireless light-wave sensing (LWS) using incoherent infrared light shows promise in safe, discreet, efficient, and non-invasive human breathing monitoring without raising privacy concerns. The respiration monitoring system needs to be trained on different types of breathing patterns to identify breathing anomalies.The system must also validate the collected data as a breathing waveform, discarding any faulty data caused by external interruption, user movement, or system malfunction. To address these needs, this study simulated normal and different types of abnormal respiration using a robot that mimics human breathing patterns. Then, time-series respiration data were collected using infrared light-wave sensing technology. Three machine learning algorithms, decision tree, random forest and XGBoost, were applied to detect breathing anomalies and faulty data. Model performances were evaluated through cross-validation, assessing classification accuracy, precision and recall scores. The random forest model achieved the highest classification accuracy of 96.75% with data collected at a 0.5m distance. In general, ensemble models like random forest and XGBoost performed better than a single model in classifying the data collected at multiple distances from the light-wave sensing setup.

Read more

4/17/2024

Total Score

0

Respiratory Anomaly Detection using Reflected Infrared Light-wave Signals

Md Zobaer Islam, Brenden Martin, Carly Gotcher, Tyler Martinez, John F. O'Hara, Sabit Ekin

In this study, we present a non-contact respiratory anomaly detection method using incoherent light-wave signals reflected from the chest of a mechanical robot that can breathe like human beings. In comparison to existing radar and camera-based sensing systems for vitals monitoring, this technology uses only a low-cost ubiquitous infrared light source and sensor. This light-wave sensing system recognizes different breathing anomalies from the variations of light intensity reflected from the chest of the robot within a 0.5m-1.5m range with an average classification accuracy of up to 96.6% using machine learning.

Read more

6/19/2024

↗️

Total Score

0

Machine learning-based algorithms for at-home respiratory disease monitoring and respiratory assessment

Negar Orangi-Fard, Alexandru Bogdan, Hersh Sagreiya

Respiratory diseases impose a significant burden on global health, with current diagnostic and management practices primarily reliant on specialist clinical testing. This work aims to develop machine learning-based algorithms to facilitate at-home respiratory disease monitoring and assessment for patients undergoing continuous positive airway pressure (CPAP) therapy. Data were collected from 30 healthy adults, encompassing respiratory pressure, flow, and dynamic thoraco-abdominal circumferential measurements under three breathing conditions: normal, panting, and deep breathing. Various machine learning models, including the random forest classifier, logistic regression, and support vector machine (SVM), were trained to predict breathing types. The random forest classifier demonstrated the highest accuracy, particularly when incorporating breathing rate as a feature. These findings support the potential of AI-driven respiratory monitoring systems to transition respiratory assessments from clinical settings to home environments, enhancing accessibility and patient autonomy. Future work involves validating these models with larger, more diverse populations and exploring additional machine learning techniques.

Read more

9/6/2024