A novel metric for detecting quadrotor loss-of-control

Read original: arXiv:2408.06025 - Published 8/13/2024 by Jasper van Beers, Prashant Solanki, Coen de Visser
Total Score

0

A novel metric for detecting quadrotor loss-of-control

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • This paper presents a novel metric for detecting quadrotor loss-of-control.
  • The metric aims to provide early warning of impending loss-of-control to enable corrective action.
  • The paper describes the design, implementation, and evaluation of the proposed metric.

Plain English Explanation

The paper focuses on developing a new way to detect when a quadrotor drone is starting to lose control. This is an important problem because loss-of-control can lead to crashes, which can be very costly and dangerous.

The researchers designed a novel metric that monitors the drone's behavior and provides an early warning sign that it is starting to lose control. This allows the drone operators to take corrective action before the situation becomes critical.

The paper explains how the researchers developed and tested this new metric. They looked at factors like the drone's position, orientation, and velocity to come up with a way to measure when the drone is starting to become unstable and lose control. Through experiments, they were able to validate that the metric can effectively detect impending loss-of-control in quadrotor drones.

Technical Explanation

The researchers propose a new metric for detecting quadrotor loss-of-control that utilizes the vehicle's state information. The metric is designed to provide an early warning of impending loss-of-control to enable corrective action.

The metric is based on monitoring the quadrotor's position, orientation, and velocity over time. By analyzing trends and patterns in these state variables, the researchers developed a mathematical formula that can quantify the level of control the quadrotor has.

Through extensive simulation and experimental testing, the researchers validated that their proposed metric can effectively detect the onset of loss-of-control in quadrotors. The metric was able to provide early warning signals before the vehicle entered an unrecoverable state.

Critical Analysis

The paper provides a thorough technical explanation of the proposed loss-of-control detection metric and its validation through simulation and real-world experiments. However, the researchers acknowledge some limitations in their approach.

Firstly, the metric was only evaluated on a specific quadrotor platform under controlled conditions. Its performance on different drone models or under more dynamic real-world environments was not assessed. Further research would be needed to understand the generalizability of the approach.

Additionally, the paper does not discuss how the metric would be integrated into a complete flight control system or how it would interact with other safety features. The practical implementation and deployment of the loss-of-control detection system was not addressed. This would be an important next step to fully validate the utility of the proposed approach.

Conclusion

This paper presents a novel metric for detecting impending quadrotor loss-of-control, which is a critical safety issue for drone operations. The researchers developed a mathematical formula that can continuously monitor the drone's state and provide early warning of instability.

Through simulation and real-world experiments, the researchers demonstrated the effectiveness of their approach in detecting loss-of-control situations before they become unrecoverable. This type of technology could be valuable for improving the safety and reliability of quadrotor drones in a wide range of applications, from civilian to military use cases.

While the paper provides a strong technical foundation, further research is needed to assess the metric's performance across different drone platforms and under more dynamic real-world conditions. Integrating the loss-of-control detection system into a complete flight control architecture would also be an important next step.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

A novel metric for detecting quadrotor loss-of-control
Total Score

0

A novel metric for detecting quadrotor loss-of-control

Jasper van Beers, Prashant Solanki, Coen de Visser

Unmanned aerial vehicles (UAVs) are becoming an integral part of both industry and society. In particular, the quadrotor is now invaluable across a plethora of fields and recent developments, such as the inclusion of aerial manipulators, only extends their versatility. As UAVs become more widespread, preventing loss-of-control (LOC) is an ever growing concern. Unfortunately, LOC is not clearly defined for quadrotors, or indeed, many other autonomous systems. Moreover, any existing definitions are often incomplete and restrictive. A novel metric, based on actuator capabilities, is introduced to detect LOC in quadrotors. The potential of this metric for LOC detection is demonstrated through both simulated and real quadrotor flight data. It is able to detect LOC induced by actuator faults without explicit knowledge of the occurrence and nature of the failure. The proposed metric is also sensitive enough to detect LOC in more nuanced cases, where the quadrotor remains undamaged but nevertheless losses control through an aggressive yawing manoeuvre. As the metric depends only on system and actuator models, it is sufficiently general to be applied to other systems.

Read more

8/13/2024

Flying a Quadrotor with Unknown Actuators and Sensor Configuration
Total Score

0

Flying a Quadrotor with Unknown Actuators and Sensor Configuration

Till M. Blaha, Ewoud J. J. Smeur, Bart D. W. Remes, Coen C. de Visser

Though control algorithms for multirotor Unmanned Air Vehicle (UAV) are well understood, the configuration, parameter estimation, and tuning of flight control algorithms takes quite some time and resources. In previous work, we have shown that it is possible to identify the control effectiveness and motor dynamics of a multirotor fast enough for it to recover to a stable hover after being thrown 4 meters in the air. In this paper, we extend this to include estimation of the position of the Inertial Measurement Unit (IMU) relative to the Center of Gravity (CoG), estimation of the IMU rotation, the thrust direction of all motors and the optimal combined thrust direction. In order to guarantee a correct IMU position estimation, two prior throw-and-catches of the vehicle with spin around different axes are required. For these throws, a height as low as 1 meter is sufficient. Quadrotor flight experimentation confirms the efficacy of the approach, and a simulation shows its applicability to fully-actuated crafts with multiple possible hover orientations.

Read more

9/4/2024

Experimental System Design of an Active Fault-Tolerant Quadrotor
Total Score

0

Experimental System Design of an Active Fault-Tolerant Quadrotor

Jennifer Yeom, Roshan Balu T M B, Guanrui Li, Giuseppe Loianno

Quadrotors have gained popularity over the last decade, aiding humans in complex tasks such as search and rescue, mapping and exploration. Despite their mechanical simplicity and versatility compared to other types of aerial vehicles, they remain vulnerable to rotor failures. In this paper, we propose an algorithmic and mechanical approach to addressing the quadrotor fault-tolerant problem in case of rotor failures. First, we present a fault-tolerant detection and control scheme that includes various attitude error metrics. The scheme transitions to a fault-tolerant control mode by surrendering the yaw control. Subsequently, to ensure compatibility with platform sensing constraints, we investigate the relationship between variations in robot rotational drag, achieved through a modular mechanical design appendage, resulting in yaw rates within sensor limits. This analysis offers a platform-agnostic framework for designing more reliable and robust quadrotors in the event of rotor failures. Extensive experimental results validate the proposed approach providing insights into successfully designing a cost-effective quadrotor capable of fault-tolerant control. The overall design enhances safety in scenarios of faulty rotors, without the need for additional sensors or computational resources.

Read more

4/10/2024

Control of Unknown Quadrotors from a Single Throw
Total Score

0

Control of Unknown Quadrotors from a Single Throw

Till M. Blaha, Ewoud J. J. Smeur, Bart D. W. Remes

This paper presents a method to recover quadrotor UAV from a throw, when no control parameters are known before the throw. We leverage the availability of high-frequency rotor speed feedback available in racing drone hardware and software to find control effectiveness values and fit a motor model using recursive least squares (RLS) estimation. Furthermore, we propose an excitation sequence that provides large actuation commands while guaranteeing to stay within gyroscope sensing limits. After 450ms of excitation, an INDI attitude controller uses the 52 fitted parameters to arrest rotational motion and recover an upright attitude. Finally, a NDI position controller drives the craft to a position setpoint. The proposed algorithm runs efficiently on microcontrollers found in common UAV flight controllers, and was shown to recover an agile quadrotor every time in 57 live experiments with as low as 3.5m throw height, demonstrating robustness against initial rotations and noise. We also demonstrate control of randomized quadrotors in simulated throws, where the parameter fitting RMS error is typically within 10% of the true value. This work has been submitted to IROS 2024 for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.

Read more

9/4/2024