Optimal Whole Body Trajectory Planning for Mobile Manipulators in Planetary Exploration and Construction
2405.14363
0
0
š§
Abstract
Space robotics poses unique challenges arising from the limitation of energy and computational resources, and the complexity of the environment and employed platforms. At the control center, offline motion planning is fundamental in the computation of optimized trajectories accounting for the system's constraints. Smooth movements, collision and forbidden areas avoidance, target visibility and energy consumption are all important factors to consider to be able to generate feasible and optimal plans. When mobile manipulators (terrestrial, aerial) are employed, the base and the arm movements are often separately planned, ultimately resulting in sub-optimal solutions. We propose an Optimal Whole Body Planner (OptiWB) based on Discrete Dynamic Programming (DDP) and optimal interpolation. Kinematic redundancy is exploited for collision and forbidden areas avoidance, and to improve target illumination and visibility from onboard cameras. The planner, implemented in ROS (Robot Operating System), interfaces 3DROCS, a mission planner used in several programs of the European Space Agency (ESA) to support planetary exploration surface missions and part of the ExoMars Rover's planning software. The proposed approach is exercised on a simplified version of the Analog-1 Interact rover by ESA, a 7-DOFs robotic arm mounted on a four wheels non-holonomic platform.
Create account to get full access
Overview
- Space robotics faces unique challenges due to limited energy and computational resources, as well as the complexity of the environment and platforms used.
- Offline motion planning is crucial for generating optimized trajectories that account for system constraints, such as smooth movements, collision avoidance, target visibility, and energy consumption.
- When using mobile manipulators (terrestrial or aerial), the base and arm movements are often planned separately, leading to suboptimal solutions.
Plain English Explanation
Robots operating in space face a unique set of challenges. They have to work with limited power and processing power, and the environments they operate in can be very complex. When planning the movements of these robots, it's important to make sure the plans are optimized to work within the robots' constraints and the environment.
One key aspect of this is offline motion planning. This means the robot's movements are planned out ahead of time, rather than trying to figure things out on the fly. The goal is to generate trajectories, or paths of movement, that are smooth, avoid collisions, keep the robot's target in view, and use energy efficiently.
When robots have both a base that moves and an arm that moves, the base and arm movements are often planned separately. This can lead to suboptimal solutions, where the overall movement of the robot isn't as efficient as it could be.
Technical Explanation
The researchers propose an Optimal Whole Body Planner (OptiWB) that uses Discrete Dynamic Programming (DDP) and optimal interpolation to plan the movements of the entire robot, including both the base and the arm, as a single integrated system.
This approach exploits the robot's kinematic redundancy - the fact that it has more degrees of freedom than are strictly necessary to reach a given position. This redundancy is used to avoid collisions and forbidden areas, as well as to improve the visibility and illumination of the robot's target from its onboard cameras.
The planner is implemented in ROS (Robot Operating System) and interfaces with 3DROCS, a mission planning tool used by the European Space Agency (ESA) for planetary exploration surface missions, including the ExoMars Rover.
The researchers tested their approach on a simplified version of the Analog-1 Interact rover, a 7-degree-of-freedom robotic arm mounted on a four-wheel non-holonomic platform.
Critical Analysis
The paper presents a promising approach to addressing the challenges of motion planning for space robotics. By considering the whole body of the robot as a single system, the OptiWB planner has the potential to generate more efficient and optimal trajectories than traditional approaches that plan the base and arm movements separately.
However, the paper only tests the approach on a simplified version of a rover, and it's unclear how well it would scale to more complex robots or environments. Additionally, the paper doesn't address the computational load of the DDP-based optimization, which could be a significant challenge for real-time applications.
Further research would be needed to assess the scalability and real-time performance of the OptiWB planner, as well as to explore its integration with other mission planning tools beyond the 3DROCS system used in this study.
Conclusion
The Optimal Whole Body Planner proposed in this paper represents an innovative approach to motion planning for space robotics. By considering the robot as a unified system and exploiting its kinematic redundancy, the planner has the potential to generate more efficient and optimal trajectories than traditional methods.
While the paper demonstrates the feasibility of the approach on a simplified rover, further research is needed to assess its scalability and real-time performance, as well as its integration with other mission planning tools. If these challenges can be addressed, the OptiWB planner could make a significant contribution to the field of space robotics and the exploration of extraterrestrial environments.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
š§
Optimal path planning and weighted control of a four-arm robot in on-orbit servicing
Celia Redondo-Verd'u, Jos'e L. Ram'on, 'Alvaro Belmonte-Baeza, Jorge Pomares, Leonard Felicetti
0
0
This paper presents a trajectory optimization and control approach for the guidance of an orbital four-arm robot in extravehicular activities. The robot operates near the target spacecraft, enabling its arm's end-effectors to reach the spacecraft's surface. Connections to the target spacecraft can be established by the arms through specific footholds (docking devices). The trajectory optimization allows the robot path planning by computing the docking positions on the target spacecraft surface, along with their timing, the arm trajectories, the six degrees of freedom body motion, and the necessary contact forces during docking. In addition, the paper introduces a controller designed to track the planned trajectories derived from the solution of the nonlinear programming problem. A weighted controller formulated as a convex optimization problem is proposed. The controller is defined as the optimization of an objective function that allows the system to perform a set of tasks simultaneously. Simulation results show the application of the trajectory optimization and control approaches to an on-orbit servicing scenario.
6/10/2024
Dynamic Planning for Sequential Whole-body Mobile Manipulation
Zhitian Li, Yida Niu, Yao Su, Hangxin Liu, Ziyuan Jiao
0
0
The dynamic Sequential Mobile Manipulation Planning (SMMP) framework is essential for the safe and robust operation of mobile manipulators in dynamic environments. Previous research has primarily focused on either motion-level or task-level dynamic planning, with limitations in handling state changes that have long-term effects or in generating responsive motions for diverse tasks, respectively. This paper presents a holistic dynamic planning framework that extends the Virtual Kinematic Chain (VKC)-based SMMP method, automating dynamic long-term task planning and reactive whole-body motion generation for SMMP problems. The framework consists of an online task planning module designed to respond to environment changes with long-term effects, a VKC-based whole-body motion planning module for manipulating both rigid and articulated objects, alongside a reactive Model Predictive Control (MPC) module for obstacle avoidance during execution. Simulations and real-world experiments validate the framework, demonstrating its efficacy and validity across sequential mobile manipulation tasks, even in scenarios involving human interference.
6/24/2024
Multi-Objective Global Path Planning for Lunar Exploration With a Quadruped Robot
Julia Richter, Hendrik Kolvenbach, Giorgio Valsecchi, Marco Hutter
0
0
In unstructured environments the best path is not always the shortest, but needs to consider various objectives like energy efficiency, risk of failure or scientific outcome. This paper proposes a global planner, based on the A* algorithm, capable of individually considering multiple layers of map data for different cost objectives. We introduce weights between the objectives, which can be adapted to achieve a variety of optimal paths. In order to find the best of these paths, a tool for statistical path analysis is presented. Our planner was tested on exemplary lunar topographies to propose two trajectories for exploring the Aristarchus Plateau. The optimized paths significantly reduce the risk of failure while yielding more scientific value compared to a manually planned paths in the same area. The planner and analysis tool are made open-source in order to simplify mission planning for planetary scientists.
6/26/2024
š
A Hybrid Task-Constrained Motion Planning for Collaborative Robots in Intelligent Remanufacturing
Wansong Liu, Chang Liu, Xiao Liang, Minghui Zheng
0
0
Industrial manipulators have extensively collaborated with human operators to execute tasks, e.g., disassembly of end-of-use products, in intelligent remanufacturing. A safety task execution requires real-time path planning for the manipulator's end-effector to autonomously avoid human operators. This is even more challenging when the end-effector needs to follow a planned path while avoiding the collision between the manipulator body and human operators, which is usually computationally expensive and limits real-time application. This paper proposes an efficient hybrid motion planning algorithm that consists of an A$^*$ algorithm and an online manipulator reconfiguration mechanism (OMRM) to tackle such challenges in task and configuration spaces respectively. The A$^*$ algorithm is first leveraged to plan the shortest collision-free path of the end-effector in task space. When the manipulator body is risky to the human operator, our OMRM then selects an alternative joint configuration with minimum reconfiguration effort from a database to assist the manipulator to follow the planned path and avoid the human operator simultaneously. The database of manipulator reconfiguration establishes the relationship between the task and configuration space offline using forward kinematics, and is able to provide multiple reconfiguration candidates for a desired end-effector's position. The proposed new hybrid algorithm plans safe manipulator motion during the whole task execution. Extensive numerical and experimental studies, as well as comparison studies between the proposed one and the state-of-the-art ones, have been conducted to validate the proposed motion planning algorithm.
6/13/2024