Radar-Based Localization For Autonomous Ground Vehicles In Suburban Neighborhoods
2405.00600
0
0
Abstract
For autonomous ground vehicles (AGVs) deployed in suburban neighborhoods and other human-centric environments the problem of localization remains a fundamental challenge. There are well established methods for localization with GPS, lidar, and cameras. But even in ideal conditions these have limitations. GPS is not always available and is often not accurate enough on its own, visual methods have difficulty coping with appearance changes due to weather and other factors, and lidar methods are prone to defective solutions due to ambiguous scene geometry. Radar on the other hand is not highly susceptible to these problems, owing in part to its longer range. Further, radar is also robust to challenging conditions that interfere with vision and lidar including fog, smoke, rain, and darkness. We present a radar-based localization system that includes a novel method for highly-accurate radar odometry for smooth, high-frequency relative pose estimation and a novel method for radar-based place recognition and relocalization. We present experiments demonstrating our methods' accuracy and reliability, which are comparable with new{other methods' published results for radar localization and we find outperform a similar method as ours applied to lidar measurements}. Further, we show our methods are lightweight enough to run on common low-power embedded hardware with ample headroom for other autonomy functions.
Create account to get full access
Overview
- This paper explores the use of radar-based localization for autonomous ground vehicles in suburban neighborhoods.
- The researchers developed a radar-inertial odometry system that combines radar and inertial measurements to estimate the vehicle's position and orientation.
- They evaluated their system's performance in a suburban setting, which poses unique challenges compared to urban or highway environments.
Plain English Explanation
Autonomous vehicles, like self-driving cars, need to know their exact location at all times to navigate safely. This is particularly important in suburban neighborhoods, where the environment is more complex than open highways or dense urban areas.
The researchers in this paper used radar sensors, which bounce radio waves off objects, to help the vehicle determine its position. They combined the radar data with information from motion sensors (called inertial measurement units) to create a radar-inertial odometry system. This allowed the vehicle to estimate its location and orientation (which way it's pointing) as it moved through the suburban streets.
Testing this system in a real suburban neighborhood, the researchers found it could accurately track the vehicle's position, even in challenging conditions like parked cars, trees, and residential buildings. This radar-based localization approach could be an important tool for enabling autonomous vehicles to navigate suburban areas safely and reliably.
Technical Explanation
The researchers developed a radar-inertial odometry system that combines data from radar sensors and inertial measurement units (IMUs) to estimate the position and orientation of an autonomous ground vehicle. The radar sensors detect and track features in the environment, such as parked cars or buildings, while the IMUs measure the vehicle's motion (acceleration and rotation).
By fusing this sensor data, the system can continuously update the vehicle's location and heading without relying solely on GPS, which can be unreliable in suburban areas with many obstructions. The researchers evaluated their approach in a real-world suburban neighborhood, testing its scalable radar-based roadside perception and self-localization capabilities.
Their results showed the radar-inertial odometry system could accurately track the vehicle's trajectory, even in the presence of complex suburban features like parked vehicles, trees, and residential buildings. This localization for offline mapping in rough environments, such as suburban neighborhoods, is a crucial step towards enabling reliable autonomous driving in these settings.
Critical Analysis
The researchers acknowledge that their evaluation was limited to a single suburban neighborhood, and further testing would be needed to validate the system's performance across a wider range of suburban environments. Additionally, the paper does not address how the radar-inertial odometry system would adapt to and fuse with lidar and other sensor modalities for a more comprehensive autonomous driving solution.
While the results are promising, the authors do not discuss potential issues, such as the impact of weather conditions (e.g., heavy rain or snow) on the radar sensor's performance or the system's ability to bootstrap and self-supervise its learning over time. Exploring these aspects could help identify limitations and areas for further research.
Conclusion
This paper presents a radar-inertial odometry system that demonstrates the potential of radar-based localization for autonomous vehicles in suburban neighborhoods. By combining radar and inertial sensor data, the system can track a vehicle's position and orientation with high accuracy, even in the presence of common suburban features like parked cars and residential buildings.
The research highlights the importance of developing robust localization methods that can operate reliably in complex, real-world environments beyond just open highways or urban centers. As autonomous driving technology continues to evolve, this radar-based approach could be an important component in enabling self-driving vehicles to navigate suburban areas safely and effectively.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
📶
Advancements in Radar Odometry
Matteo Frosi, Mirko Usuelli, Matteo Matteucci
0
0
Radar odometry estimation has emerged as a critical technique in the field of autonomous navigation, providing robust and reliable motion estimation under various environmental conditions. Despite its potential, the complex nature of radar signals and the inherent challenges associated with processing these signals have limited the widespread adoption of this technology. This paper aims to address these challenges by proposing novel improvements to an existing method for radar odometry estimation, designed to enhance accuracy and reliability in diverse scenarios. Our pipeline consists of filtering, motion compensation, oriented surface points computation, smoothing, one-to-many radar scan registration, and pose refinement. The developed method enforces local understanding of the scene, by adding additional information through smoothing techniques, and alignment of consecutive scans, as a refinement posterior to the one-to-many registration. We present an in-depth investigation of the contribution of each improvement to the localization accuracy, and we benchmark our system on the sequences of the main datasets for radar understanding, i.e., the Oxford Radar RobotCar, MulRan, and Boreas datasets. The proposed pipeline is able to achieve superior results, on all scenarios considered and under harsh environmental constraints.
4/8/2024
Scalable Radar-based Roadside Perception: Self-localization and Occupancy Heat Map for Traffic Analysis
Longfei Han, Qiuyu Xu, Klaus Kefferputz, Ying Lu, Gordon Elger, Jurgen Beyerer
0
0
4D mmWave radar sensors are suitable for roadside perception in city-scale Intelligent Transportation Systems (ITS) due to their long sensing range, weatherproof functionality, simple mechanical design, and low manufacturing cost. In this work, we investigate radar-based ITS for scalable traffic analysis. Localization of these radar sensors at city scale is a fundamental task in ITS. For flexible sensor setups, it requires even more effort. To address this task, we propose a self-localization approach that matches two descriptions of the road: the one from the geometry of the motion trajectories of cumulatively observed vehicles, and the other one from the aerial laser scan. An Iterative Closest Point (ICP) algorithm is used to register the motion trajectory in the road section of the laser scan. The resulting estimate of the transformation matrix represents the sensor pose in a global reference frame. We evaluate the results and show that it outperforms other map-based radar localization methods, especially for the orientation estimation. Beyond the localization result, we project radar sensor data onto a city-scale laser scan and generate a scalable occupancy heat map as a traffic analysis tool. This is demonstrated using two radar sensors monitoring an urban area in the real world.
4/23/2024
Localization and Offline Mapping of High-Voltage Substations in Rough Terrain Using a Ground Vehicle
Ioannis Alamanos, George P. Moustris, Costas S. Tzafestas
0
0
This paper proposes an efficient hybrid localization framework for the autonomous navigation of an unmanned ground vehicle in uneven or rough terrain, as well as techniques for detailed processing of 3D point cloud data. The framework is an extended version of FAST-LIO2 algorithm aiming at robust localization in known point cloud maps using Lidar and inertial data. The system is based on a hybrid scheme which allows the robot to not only localize in a pre-built map, but concurrently perform simultaneous localization and mapping to explore unknown scenes, and build extended maps aligned with the existing map. Our framework has been developed for the task of autonomous ground inspection of high-voltage electrical substations residing in rough terrain. We present the application of our algorithm in field trials, using a pre-built map of the substation, but also analyze techniques that aim to isolate the ground and its traversable regions, to allow the robot to approach points of interest within the map and perform inspection tasks using visual and thermal data.
4/1/2024
Monocular Localization with Semantics Map for Autonomous Vehicles
Jixiang Wan, Xudong Zhang, Shuzhou Dong, Yuwei Zhang, Yuchen Yang, Ruoxi Wu, Ye Jiang, Jijunnan Li, Jinquan Lin, Ming Yang
0
0
Accurate and robust localization remains a significant challenge for autonomous vehicles. The cost of sensors and limitations in local computational efficiency make it difficult to scale to large commercial applications. Traditional vision-based approaches focus on texture features that are susceptible to changes in lighting, season, perspective, and appearance. Additionally, the large storage size of maps with descriptors and complex optimization processes hinder system performance. To balance efficiency and accuracy, we propose a novel lightweight visual semantic localization algorithm that employs stable semantic features instead of low-level texture features. First, semantic maps are constructed offline by detecting semantic objects, such as ground markers, lane lines, and poles, using cameras or LiDAR sensors. Then, online visual localization is performed through data association of semantic features and map objects. We evaluated our proposed localization framework in the publicly available KAIST Urban dataset and in scenarios recorded by ourselves. The experimental results demonstrate that our method is a reliable and practical localization solution in various autonomous driving localization tasks.
6/7/2024