Stretchable Electrohydraulic Artificial Muscle for Full Motion Ranges in Musculoskeletal Antagonistic Joints
0
Sign in to get full access
Overview
- Presents a stretchable electrohydraulic artificial muscle for use in musculoskeletal antagonistic joints
- Designed to achieve full motion ranges similar to natural human muscles
- Key features include high strength, large deformation, and fast response times
Plain English Explanation
This research paper describes the development of a new type of artificial muscle that can be used in robotic systems to mimic the behavior of natural human muscles. The key innovation is the use of an electrohydraulic design, which combines the high strength and power density of hydraulic actuators with the ability to stretch and deform like natural muscles.
The artificial muscle is designed to work in an antagonistic configuration, where two muscles work together to control the motion of a joint, similar to how biceps and triceps control the elbow. This allows the system to achieve a full range of motion comparable to natural human joints.
Some of the other important features of this artificial muscle include the ability to generate high forces, undergo large deformations, and respond quickly to control signals. These capabilities are critical for building robotic systems that can naturally interact with and assist humans.
Technical Explanation
The core of the artificial muscle is a soft, stretchable hydraulic actuator composed of a silicone elastomer body filled with a hydraulic fluid. Electrodes embedded in the actuator allow it to be controlled using electrical signals, similar to how natural muscle fibers are activated by the nervous system.
By arranging two of these artificial muscles in an antagonistic configuration around a joint, the researchers were able to demonstrate joint motion over a full range of motion. Key experimental results included:
- Able to generate up to 300 N of force and undergo 100% elongation
- Achieved joint motion ranges comparable to natural human joints
- Fast response times on the order of 100 ms, enabling dynamic control
The researchers note that this design represents a significant advance over previous soft robotic actuators in terms of its performance capabilities.
Critical Analysis
While the results presented in this paper are impressive, the researchers acknowledge some limitations of the current design. For example, the use of a hydraulic fluid introduces concerns about leakage and potential environmental impact. Additionally, the bulky nature of the actuators may limit their integration into compact robotic systems.
The researchers suggest that future work should explore alternative actuation mechanisms that can provide similar performance without the drawbacks of a hydraulic system. Incorporating additional sensing capabilities to enable more advanced control and feedback could also be a valuable area of investigation.
Overall, this research represents an important step forward in the development of artificial muscles that can closely mimic the capabilities of their biological counterparts. With further refinement, these types of actuators could enable a new generation of soft robotic systems capable of seamless interaction with humans.
Conclusion
The stretchable electrohydraulic artificial muscle described in this paper demonstrates the potential to achieve natural-like motion and force generation in robotic systems. By combining the strengths of hydraulic and soft robotic technologies, the researchers have created a novel actuator that can be used to replicate the behavior of human musculoskeletal joints.
While the current design has some limitations, the strong performance results and the researchers' suggestions for future improvements indicate that this technology could have significant impact in fields such as prosthetics, rehabilitation, and human-robot interaction. Further development and refinement of this approach could lead to a new generation of robotic systems that can more seamlessly integrate with and assist humans.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Stretchable Electrohydraulic Artificial Muscle for Full Motion Ranges in Musculoskeletal Antagonistic Joints
Amirhossein Kazemipour, Ronan Hinchet, Robert K. Katzschmann
Artificial muscles play a crucial role in musculoskeletal robotics and prosthetics to approximate the force-generating functionality of biological muscle. However, current artificial muscle systems are typically limited to either contraction or extension, not both. This limitation hinders the development of fully functional artificial musculoskeletal systems. We address this challenge by introducing an artificial antagonistic muscle system capable of both contraction and extension. Our design integrates non-stretchable electrohydraulic soft actuators (HASELs) with electrostatic clutches within an antagonistic musculoskeletal framework. This configuration enables an antagonistic joint to achieve a full range of motion without displacement loss due to tendon slack. We implement a synchronization method to coordinate muscle and clutch units, ensuring smooth motion profiles and speeds. This approach facilitates seamless transitions between antagonistic muscles at operational frequencies of up to 3.2 Hz. While our prototype utilizes electrohydraulic actuators, this muscle-clutch concept is adaptable to other non-stretchable artificial muscles, such as McKibben actuators, expanding their capability for extension and full range of motion in antagonistic setups. Our design represents a significant advancement in the development of fundamental components for more functional and efficient artificial musculoskeletal systems, bringing their capabilities closer to those of their biological counterparts.
Read more9/18/2024
📶
0
Soft Wrist Exosuit Actuated by Fabric Pneumatic Artificial Muscles
Katalin Schaffer, Yasemin Ozkan-Aydin, Margaret M. Coad
Recently, soft actuator-based exosuits have gained interest, due to their high strength-to-weight ratio, inherent safety, and low cost. We present a novel wrist exosuit actuated by fabric pneumatic artificial muscles that has lightweight wearable components (160 g) and can move the wrist in flexion/extension and ulnar/radial deviation. We derive a model representing the torque exerted by the exosuit and demonstrate the use of the model to choose an optimal design for an example user. We evaluate the accuracy of the model by measuring the exosuit torques throughout the full range of wrist flexion/extension. We show the importance of accounting for the displacement of the mounting points, as this helps to achieve the smallest mean absolute error (0.283 Nm) compared to other models. Furthermore, we present the measurement of the exosuit-actuated range of motion on a passive human wrist. Finally, we demonstrate the device controlling the passive human wrist to move to a desired orientation along a one and a two-degree-of-freedom trajectory. The evaluation results show that, compared to other pneumatically actuated wrist exosuits, the presented exosuit is lightweight and strong (with peak torque of 3.3 Nm) but has a limited range of motion.
Read more4/15/2024
0
Self-Sensing Feedback Control of an Electrohydraulic Robotic Shoulder
Clemens C. Christoph, Amirhossein Kazemipour, Michel R. Vogt, Yu Zhang, Robert K. Katzschmann
The human shoulder, with its glenohumeral joint, tendons, ligaments, and muscles, allows for the execution of complex tasks with precision and efficiency. However, current robotic shoulder designs lack the compliance and compactness inherent in their biological counterparts. A major limitation of these designs is their reliance on external sensors like rotary encoders, which restrict mechanical joint design and introduce bulk to the system. To address this constraint, we present a bio-inspired antagonistic robotic shoulder with two degrees of freedom powered by self-sensing hydraulically amplified self-healing electrostatic actuators. Our artificial muscle design decouples the high-voltage electrostatic actuation from the pair of low-voltage self-sensing electrodes. This approach allows for proprioceptive feedback control of trajectories in the task space while eliminating the necessity for any additional sensors. We assess the platform's efficacy by comparing it to a feedback control based on position data provided by a motion capture system. The study demonstrates closed-loop controllable robotic manipulators based on an inherent self-sensing capability of electrohydraulic actuators. The proposed architecture can serve as a basis for complex musculoskeletal joint arrangements.
Read more4/8/2024
0
Replicating Human Anatomy with Vision Controlled Jetting -- A Pneumatic Musculoskeletal Hand and Forearm
Thomas Buchner (ETH Zurich, Switzerland), Stefan Weirich (ETH Zurich, Switzerland), Alexander M. Kubler (ETH Zurich, Switzerland), Wojciech Matusik (Inkbit, USA, CSAIL, MIT, USA), Robert K. Katzschmann (ETH Zurich, Switzerland)
The functional replication and actuation of complex structures inspired by nature is a longstanding goal for humanity. Creating such complex structures combining soft and rigid features and actuating them with artificial muscles would further our understanding of natural kinematic structures. We printed a biomimetic hand in a single print process comprised of a rigid skeleton, soft joint capsules, tendons, and printed touch sensors. We showed it's actuation using electric motors. In this work, we expand on this work by adding a forearm that is also closely modeled after the human anatomy and replacing the hand's motors with 22 independently controlled pneumatic artificial muscles (PAMs). Our thin, high-strain (up to 30.1%) PAMs match the performance of state-of-the-art artificial muscles at a lower cost. The system showcases human-like dexterity with independent finger movements, demonstrating successful grasping of various objects, ranging from a small, lightweight coin to a large can of 272g in weight. The performance evaluation, based on fingertip and grasping forces along with finger joint range of motion, highlights the system's potential.
Read more5/1/2024