Soft Wrist Exosuit Actuated by Fabric Pneumatic Artificial Muscles

Read original: arXiv:2310.17861 - Published 4/15/2024 by Katalin Schaffer, Yasemin Ozkan-Aydin, Margaret M. Coad
Total Score

0

📶

Sign in to get full access

or

If you already have an account, we'll log you in

Overview

  • Researchers have developed a novel wrist exosuit actuated by fabric pneumatic artificial muscles.
  • The exosuit has lightweight wearable components (160 g) and can move the wrist in flexion/extension and ulnar/radial deviation.
  • The researchers derived a model to represent the torque exerted by the exosuit and used it to optimize the design for an example user.
  • They evaluated the accuracy of the model by measuring the exosuit torques throughout the full range of wrist flexion/extension.
  • The researchers also measured the exosuit-actuated range of motion on a passive human wrist and demonstrated the device controlling the passive human wrist to move to a desired orientation.

Plain English Explanation

Soft, fabric-based robotic devices called "exosuits" have gained interest recently due to their high strength-to-weight ratio, inherent safety, and low cost. Researchers have developed a new type of wrist exosuit that uses pneumatic artificial muscles made of fabric to move the wrist. This exosuit is lightweight, weighing only 160 grams, and can bend the wrist in different directions.

The researchers created a mathematical model to understand how much force the exosuit can apply to the wrist. They used this model to design an optimal version of the exosuit for a specific user. To test the accuracy of the model, they measured the actual forces the exosuit could produce as the wrist moved through its full range of motion. They found that accounting for how the attachment points on the exosuit move as the wrist bends helped achieve the most accurate model, with an average error of only 0.283 Newton-meters.

Furthermore, the researchers measured how much the exosuit could move a person's wrist when it was relaxed and not actively trying to move. They also showed that the exosuit could control the wrist to move it to specific positions, even in multiple directions at once. Compared to other pneumatic wrist exosuits, this one is lightweight and powerful, generating up to 3.3 Newton-meters of torque, but it has a limited range of motion.

Technical Explanation

The researchers developed a novel wrist exosuit actuated by fabric pneumatic artificial muscles that has lightweight wearable components (160 g) and can move the wrist in flexion/extension and ulnar/radial deviation. They derived a model representing the torque exerted by the exosuit and demonstrated using the model to choose an optimal design for an example user.

To evaluate the accuracy of the model, the researchers measured the exosuit torques throughout the full range of wrist flexion/extension. They found that accounting for the displacement of the mounting points helped achieve the smallest mean absolute error (0.283 Nm) compared to other models.

The researchers also presented the measurement of the exosuit-actuated range of motion on a passive human wrist. Finally, they demonstrated the device controlling the passive human wrist to move to a desired orientation along a one and a two-degree-of-freedom trajectory. The evaluation results show that, compared to other pneumatically actuated wrist exosuits, the presented exosuit is lightweight and strong (with peak torque of 3.3 Nm) but has a limited range of motion.

Critical Analysis

The researchers acknowledged that the exosuit has a limited range of motion compared to other pneumatic wrist exosuits. This could be a significant limitation for some applications that require a wider range of wrist movement.

Additionally, the paper does not address the long-term durability and reliability of the fabric-based pneumatic muscles. Soft, compliant actuators can be more prone to wear and tear over extended use, which could affect the exosuit's performance and lifespan.

Further research could explore ways to increase the range of motion without compromising the exosuit's lightweight and powerful design. Investigating the long-term reliability of the fabric-based actuation system would also be an important next step.

Conclusion

The researchers have developed a novel wrist exosuit that uses lightweight, fabric-based pneumatic artificial muscles to provide a high strength-to-weight ratio and inherent safety. The exosuit can move the wrist in multiple directions and the researchers have demonstrated a model to optimize its design. While the exosuit has a limited range of motion compared to other pneumatic designs, it represents an interesting advancement in soft robotic technology for wearable applications.



This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!

Follow @aimodelsfyi on 𝕏 →

Related Papers

📶

Total Score

0

Soft Wrist Exosuit Actuated by Fabric Pneumatic Artificial Muscles

Katalin Schaffer, Yasemin Ozkan-Aydin, Margaret M. Coad

Recently, soft actuator-based exosuits have gained interest, due to their high strength-to-weight ratio, inherent safety, and low cost. We present a novel wrist exosuit actuated by fabric pneumatic artificial muscles that has lightweight wearable components (160 g) and can move the wrist in flexion/extension and ulnar/radial deviation. We derive a model representing the torque exerted by the exosuit and demonstrate the use of the model to choose an optimal design for an example user. We evaluate the accuracy of the model by measuring the exosuit torques throughout the full range of wrist flexion/extension. We show the importance of accounting for the displacement of the mounting points, as this helps to achieve the smallest mean absolute error (0.283 Nm) compared to other models. Furthermore, we present the measurement of the exosuit-actuated range of motion on a passive human wrist. Finally, we demonstrate the device controlling the passive human wrist to move to a desired orientation along a one and a two-degree-of-freedom trajectory. The evaluation results show that, compared to other pneumatically actuated wrist exosuits, the presented exosuit is lightweight and strong (with peak torque of 3.3 Nm) but has a limited range of motion.

Read more

4/15/2024

Stretchable Pneumatic Sleeve for Adaptable, Low-Displacement Anchoring in Exosuits
Total Score

0

Stretchable Pneumatic Sleeve for Adaptable, Low-Displacement Anchoring in Exosuits

Katalin Schaffer, Ultan Fallon, Margaret M. Coad

Despite recent advances in wearable technology, interfacing movement assistance devices with the human body remains challenging. We present a stretchable pneumatic sleeve that can anchor an exosuit actuator to the human arm with a low displacement of the actuator's mounting point relative to the body during operation. Our sleeve has the potential to serve as an adaptable attachment mechanism for exosuits, since it can adjust its pressure to only compress the arm as much as needed to transmit the applied exosuit forces without a large displacement. We discuss the design of our sleeve, which is made of fabric pneumatic artificial muscle (fPAM) actuators formed into bands. We quantify the performance of nine fPAM bands of various lengths and widths, as well as three sleeves (an fPAM sleeve, a series pouch motor (SPM) sleeve as in previous literature, and an off the shelf hook and loop sleeve), through the measurement of the compressing force as a function of pressure and the localized pulling force that can be resisted as a function of both pressure and mounting point displacement. Our experimental results show that fPAM bands with smaller resting length and/or larger resting width produce higher forces. Also, when inflated, an fPAM sleeve that has equivalent dimensions to the SPM sleeve while fully stretched has similar performance to the SPM sleeve. While inflated, both pneumatic sleeves decrease the mounting point displacement compared to the hook and loop sleeve. Compared to the SPM sleeve, the fPAM sleeve is able to hold larger internal pressure before bursting, increasing its possible force range. Also, when not inflated, the fPAM sleeve resists the pulling force well, indicating its ability to provide anchoring when not actuated.

Read more

4/9/2024

Assistive Soft Robotic Glove with Ruffles Enhanced Textile Actuators
Total Score

0

Assistive Soft Robotic Glove with Ruffles Enhanced Textile Actuators

Cem Suulker, Kaspar Althoefer

Hand-wearable robots, specifically exoskeletons, are designed to aid hands in daily activities, playing a crucial role in post-stroke rehabilitation and assisting the elderly. Our contribution to this field is a textile robotic glove with integrated actuators. These actuators, powered by pneumatic pressure, guide the user's hand to a desired position. Crafted from textile materials, our soft robotic glove prioritizes safety, lightweight construction, and user comfort. Utilizing the ruffles technique, integrated actuators guarantee high performance in blocking force and bending effectiveness. Additionally, we present a participant study confirming the effectiveness of our robotic device.

Read more

8/16/2024

Replicating Human Anatomy with Vision Controlled Jetting -- A Pneumatic Musculoskeletal Hand and Forearm
Total Score

0

Replicating Human Anatomy with Vision Controlled Jetting -- A Pneumatic Musculoskeletal Hand and Forearm

Thomas Buchner (ETH Zurich, Switzerland), Stefan Weirich (ETH Zurich, Switzerland), Alexander M. Kubler (ETH Zurich, Switzerland), Wojciech Matusik (Inkbit, USA, CSAIL, MIT, USA), Robert K. Katzschmann (ETH Zurich, Switzerland)

The functional replication and actuation of complex structures inspired by nature is a longstanding goal for humanity. Creating such complex structures combining soft and rigid features and actuating them with artificial muscles would further our understanding of natural kinematic structures. We printed a biomimetic hand in a single print process comprised of a rigid skeleton, soft joint capsules, tendons, and printed touch sensors. We showed it's actuation using electric motors. In this work, we expand on this work by adding a forearm that is also closely modeled after the human anatomy and replacing the hand's motors with 22 independently controlled pneumatic artificial muscles (PAMs). Our thin, high-strain (up to 30.1%) PAMs match the performance of state-of-the-art artificial muscles at a lower cost. The system showcases human-like dexterity with independent finger movements, demonstrating successful grasping of various objects, ranging from a small, lightweight coin to a large can of 272g in weight. The performance evaluation, based on fingertip and grasping forces along with finger joint range of motion, highlights the system's potential.

Read more

5/1/2024