Using autoencoders and deep transfer learning to determine the stellar parameters of 286 CARMENES M dwarfs
2405.08703
0
0
🤿
Abstract
Deep learning (DL) techniques are a promising approach among the set of methods used in the ever-challenging determination of stellar parameters in M dwarfs. In this context, transfer learning could play an important role in mitigating uncertainties in the results due to the synthetic gap (i.e. difference in feature distributions between observed and synthetic data). We propose a feature-based deep transfer learning (DTL) approach based on autoencoders to determine stellar parameters from high-resolution spectra. Using this methodology, we provide new estimations for the effective temperature, surface gravity, metallicity, and projected rotational velocity for 286 M dwarfs observed by the CARMENES survey. Using autoencoder architectures, we projected synthetic PHOENIX-ACES spectra and observed CARMENES spectra onto a new feature space of lower dimensionality in which the differences between the two domains are reduced. We used this low-dimensional new feature space as input for a convolutional neural network to obtain the stellar parameter determinations. We performed an extensive analysis of our estimated stellar parameters, ranging from 3050 to 4300 K, 4.7 to 5.1 dex, and -0.53 to 0.25 dex for Teff, logg, and [Fe/H], respectively. Our results are broadly consistent with those of recent studies using CARMENES data, with a systematic deviation in our Teff scale towards hotter values for estimations above 3750 K. Furthermore, our methodology mitigates the deviations in metallicity found in previous DL techniques due to the synthetic gap. We consolidated a DTL-based methodology to determine stellar parameters in M dwarfs from synthetic spectra, with no need for high-quality measurements involved in the knowledge transfer. These results suggest the great potential of DTL to mitigate the differences in feature distributions between the observations and the PHOENIX-ACES spectra.
Create account to get full access
Overview
- The paper explores the use of deep learning (DL) techniques, specifically transfer learning, to determine stellar parameters (such as effective temperature, surface gravity, and metallicity) for M dwarf stars.
- The researchers propose a feature-based deep transfer learning (DTL) approach using autoencoders to project observed and synthetic spectra onto a new feature space, reducing the differences between the two domains.
- This low-dimensional feature space is then used as input for a convolutional neural network to obtain the stellar parameter estimations.
- The methodology is applied to 286 M dwarfs observed by the CARMENES survey, providing new estimations for their stellar parameters.
Plain English Explanation
The researchers are looking for a better way to measure the properties of small, cool stars called M dwarfs. Determining stellar parameters is challenging because the data we have (observed spectra) doesn't always match up well with the data we use to train our models (synthetic spectra).
To address this problem, the researchers used a technique called transfer learning. They started by using autoencoders to project both the observed and synthetic spectra onto a new, lower-dimensional feature space. This helps reduce the differences between the two types of data.
They then used this new feature space as input to a machine learning model (a convolutional neural network) to estimate the stellar parameters, like temperature, gravity, and metallicity, for 286 M dwarfs observed by the CARMENES survey. Their results generally match previous studies, but with some systematic differences, particularly for hotter M dwarfs.
The key advantage of this approach is that it helps overcome the "synthetic gap" - the mismatch between the observed data and the synthetic data used to train models. By using transfer learning and autoencoders, the researchers were able to reconstruct high-quality features from the spectra and get better estimates of the stellar parameters.
Technical Explanation
The researchers proposed a feature-based deep transfer learning (DTL) approach using autoencoders to determine stellar parameters from high-resolution spectra of M dwarf stars. They used this methodology to provide new estimations of effective temperature, surface gravity, metallicity, and projected rotational velocity for 286 M dwarfs observed by the CARMENES survey.
The key steps of their approach were:
-
Projecting both the synthetic PHOENIX-ACES spectra and the observed CARMENES spectra onto a new feature space of lower dimensionality using autoencoder architectures. This helps reduce the differences between the two domains (the "synthetic gap").
-
Using this low-dimensional new feature space as input for a convolutional neural network to obtain the stellar parameter determinations.
The researchers performed an extensive analysis of the estimated stellar parameters, which ranged from 3050 to 4300 K for effective temperature, 4.7 to 5.1 dex for surface gravity, and -0.53 to 0.25 dex for metallicity. Their results were broadly consistent with recent studies using CARMENES data, but with a systematic deviation in their effective temperature scale towards hotter values for estimations above 3750 K.
Importantly, the DTL-based methodology was able to mitigate the deviations in metallicity found in previous DL techniques due to the synthetic gap. The researchers consolidated a DTL-based approach to determine stellar parameters in M dwarfs from synthetic spectra, without the need for high-quality measurements involved in the knowledge transfer.
Critical Analysis
The researchers acknowledged several limitations and areas for further research in their paper. Firstly, they noted that their methodology still showed a systematic deviation in the effective temperature scale towards hotter values for M dwarfs above 3750 K. This suggests there may be room for improvement in the feature extraction and mapping process, particularly for the hotter end of the M dwarf range.
Additionally, the researchers did not provide a detailed comparison of their results to other state-of-the-art techniques, such as those that use stacked neural networks for geological mapping or other advanced DL approaches. A more comprehensive benchmarking against other methods would help better evaluate the performance and generalizability of their DTL-based approach.
The paper also did not address potential issues with the quality or representativeness of the CARMENES observational data, which could also impact the accuracy of the stellar parameter estimations. Further research is needed to understand how the DTL methodology performs with different observational datasets, particularly those with known biases or uncertainties.
Overall, the researchers have presented a promising approach to mitigate the synthetic gap in determining stellar parameters for M dwarfs. However, additional work is needed to fully validate the methodology and compare it to other state-of-the-art techniques in this active research area.
Conclusion
The paper proposes a feature-based deep transfer learning (DTL) approach using autoencoders to determine stellar parameters for M dwarf stars from high-resolution spectra. By projecting both observed and synthetic spectra onto a new lower-dimensional feature space, the researchers were able to mitigate the "synthetic gap" – the mismatch between the observed data and the synthetic data typically used to train models.
The researchers applied their DTL-based methodology to 286 M dwarfs observed by the CARMENES survey, providing new estimations of effective temperature, surface gravity, metallicity, and projected rotational velocity. While the results were generally consistent with previous studies, the approach helped address some of the biases in metallicity estimation seen in earlier deep learning techniques.
The paper demonstrates the potential of transfer learning and feature-based approaches to improve the determination of stellar parameters, particularly for challenging cases like M dwarfs where the observed data may not match well with synthetic training data. Further research is needed to fully validate the methodology and compare it to other state-of-the-art techniques in this active field of research.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
Deep Learning and LLM-based Methods Applied to Stellar Lightcurve Classification
Yu-Yang Li, Yu Bai, Cunshi Wang, Mengwei Qu, Ziteng Lu, Roberto Soria, Jifeng Liu
0
0
Light curves serve as a valuable source of information on stellar formation and evolution. With the rapid advancement of machine learning techniques, it can be effectively processed to extract astronomical patterns and information. In this study, we present a comprehensive evaluation of deep-learning and large language model (LLM) based models for the automatic classification of variable star light curves, based on large datasets from the Kepler and K2 missions. Special emphasis is placed on Cepheids, RR Lyrae, and eclipsing binaries, examining the influence of observational cadence and phase distribution on classification precision. Employing AutoDL optimization, we achieve striking performance with the 1D-Convolution+BiLSTM architecture and the Swin Transformer, hitting accuracies of 94% and 99% correspondingly, with the latter demonstrating a notable 83% accuracy in discerning the elusive Type II Cepheids-comprising merely 0.02% of the total dataset.We unveil StarWhisper LightCurve (LC), an innovative Series comprising three LLM-based models: LLM, multimodal large language model (MLLM), and Large Audio Language Model (LALM). Each model is fine-tuned with strategic prompt engineering and customized training methods to explore the emergent abilities of these models for astronomical data. Remarkably, StarWhisper LC Series exhibit high accuracies around 90%, significantly reducing the need for explicit feature engineering, thereby paving the way for streamlined parallel data processing and the progression of multifaceted multimodal models in astronomical applications. The study furnishes two detailed catalogs illustrating the impacts of phase and sampling intervals on deep learning classification accuracy, showing that a substantial decrease of up to 14% in observation duration and 21% in sampling points can be realized without compromising accuracy by more than 10%.
4/17/2024
🤿
Combining Denoising Autoencoders with Contrastive Learning to fine-tune Transformer Models
Alejo Lopez-Avila, V'ictor Su'arez-Paniagua
0
0
Recently, using large pretrained Transformer models for transfer learning tasks has evolved to the point where they have become one of the flagship trends in the Natural Language Processing (NLP) community, giving rise to various outlooks such as prompt-based, adapters or combinations with unsupervised approaches, among many others. This work proposes a 3 Phase technique to adjust a base model for a classification task. First, we adapt the model's signal to the data distribution by performing further training with a Denoising Autoencoder (DAE). Second, we adjust the representation space of the output to the corresponding classes by clustering through a Contrastive Learning (CL) method. In addition, we introduce a new data augmentation approach for Supervised Contrastive Learning to correct the unbalanced datasets. Third, we apply fine-tuning to delimit the predefined categories. These different phases provide relevant and complementary knowledge to the model to learn the final task. We supply extensive experimental results on several datasets to demonstrate these claims. Moreover, we include an ablation study and compare the proposed method against other ways of combining these techniques.
5/24/2024
The Scaling Law in Stellar Light Curves
Jia-Shu Pan, Yuan-Sen Ting, Yang Huang, Jie Yu, Ji-Feng Liu
0
0
Analyzing time series of fluxes from stars, known as stellar light curves, can reveal valuable information about stellar properties. However, most current methods rely on extracting summary statistics, and studies using deep learning have been limited to supervised approaches. In this research, we investigate the scaling law properties that emerge when learning from astronomical time series data using self-supervised techniques. By employing the GPT-2 architecture, we show the learned representation improves as the number of parameters increases from $10^4$ to $10^9$, with no signs of performance plateauing. We demonstrate that a self-supervised Transformer model achieves 3-10 times the sample efficiency compared to the state-of-the-art supervised learning model when inferring the surface gravity of stars as a downstream task. Our research lays the groundwork for analyzing stellar light curves by examining them through large-scale auto-regressive generative models.
6/18/2024
An Autoencoder and Generative Adversarial Networks Approach for Multi-Omics Data Imbalanced Class Handling and Classification
Ibrahim Al-Hurani, Abedalrhman Alkhateeb, Salama Ikki
0
0
In the relentless efforts in enhancing medical diagnostics, the integration of state-of-the-art machine learning methodologies has emerged as a promising research area. In molecular biology, there has been an explosion of data generated from multi-omics sequencing. The advent sequencing equipment can provide large number of complicated measurements per one experiment. Therefore, traditional statistical methods face challenging tasks when dealing with such high dimensional data. However, most of the information contained in these datasets is redundant or unrelated and can be effectively reduced to significantly fewer variables without losing much information. Dimensionality reduction techniques are mathematical procedures that allow for this reduction; they have largely been developed through statistics and machine learning disciplines. The other challenge in medical datasets is having an imbalanced number of samples in the classes, which leads to biased results in machine learning models. This study, focused on tackling these challenges in a neural network that incorporates autoencoder to extract latent space of the features, and Generative Adversarial Networks (GAN) to generate synthetic samples. Latent space is the reduced dimensional space that captures the meaningful features of the original data. Our model starts with feature selection to select the discriminative features before feeding them to the neural network. Then, the model predicts the outcome of cancer for different datasets. The proposed model outperformed other existing models by scoring accuracy of 95.09% for bladder cancer dataset and 88.82% for the breast cancer dataset.
5/17/2024