Backpropagation-free Network for 3D Test-time Adaptation
0
Sign in to get full access
Overview
- This paper presents a novel technique called Backpropagation-free Network for 3D Test-time Adaptation, which aims to improve the performance of 3D computer vision models on new, unseen data.
- The key idea is to use a lightweight, learnable module that can be attached to the end of a pre-trained 3D model, allowing the model to adapt to new data without requiring expensive backpropagation-based fine-tuning.
- The authors demonstrate the effectiveness of their approach on several 3D tasks, including object detection, semantic segmentation, and point cloud classification.
Plain English Explanation
Imagine you have a robot that can see and understand 3D objects. The robot is trained on a lot of 3D data, so it's pretty good at recognizing things. But what if the robot is then put in a new environment with different types of objects? The robot might not perform as well because it's not used to those new objects.
The researchers in this paper came up with a clever way to help the robot adapt to the new environment without having to retrain the entire system from scratch. They added a small, learnable module to the end of the robot's 3D vision system. This module can "learn" on the fly to adjust the robot's understanding of the new objects, without having to go through the whole expensive and time-consuming process of retraining the entire system.
The researchers tested this approach on several 3D computer vision tasks, like detecting objects, identifying different parts of a scene, and classifying different types of 3D points. In each case, they found that their "backpropagation-free" approach was effective at helping the robot adapt to new situations, without having to completely retrain the entire system.
Technical Explanation
The key innovation in this paper is a lightweight, learnable module that can be appended to the end of a pre-trained 3D neural network model. This module, called the Backpropagation-free Adaptation Module (BAM), is designed to allow the model to adapt to new, unseen data at test time without requiring expensive backpropagation-based fine-tuning.
The BAM consists of a small number of learnable parameters that can be efficiently optimized using a simple gradient-free optimization technique. This allows the model to adapt its behavior on the fly, without having to retrain the entire network from scratch.
The authors evaluate their approach on several 3D computer vision tasks, including 3D object detection, 3D semantic segmentation, and 3D point cloud classification. They show that the BAM can effectively adapt the pre-trained models to new test-time distributions, outperforming alternative test-time adaptation methods.
Critical Analysis
The authors provide a thorough evaluation of their proposed Backpropagation-free Adaptation Module (BAM) on several 3D computer vision tasks. They demonstrate the effectiveness of their approach compared to existing test-time adaptation methods, which is a valuable contribution to the field.
However, the paper does not address some potential limitations of the BAM approach. For example, the authors do not discuss the scalability of the BAM to larger and more complex 3D models, or how the performance of the BAM might be affected by the degree of distributional shift between the training and test data.
Additionally, the paper could have provided more insights into the inner workings of the BAM and the factors that contribute to its success. A deeper analysis of the optimization dynamics and the types of adaptations learned by the BAM could have helped readers better understand the strengths and limitations of the approach.
Overall, the paper presents a promising technique for improving the performance of 3D computer vision models on new, unseen data, but there is still room for further research and analysis to fully understand the capabilities and limitations of the Backpropagation-free Adaptation Module.
Conclusion
The Backpropagation-free Network for 3D Test-time Adaptation presented in this paper offers a novel and efficient approach to improving the performance of 3D computer vision models on new, unseen data. By incorporating a lightweight, learnable module that can be optimized without expensive backpropagation, the authors demonstrate substantial gains in object detection, semantic segmentation, and point cloud classification tasks.
This work represents an important step forward in the field of test-time adaptation, providing a practical solution for keeping 3D computer vision models up-to-date and effective in real-world environments. As 3D sensing and perception become increasingly important for applications like autonomous vehicles, robotics, and augmented reality, techniques like the Backpropagation-free Adaptation Module may play a crucial role in ensuring these systems can adapt and perform well in diverse and ever-changing scenarios.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Backpropagation-free Network for 3D Test-time Adaptation
Yanshuo Wang, Ali Cheraghian, Zeeshan Hayder, Jie Hong, Sameera Ramasinghe, Shafin Rahman, David Ahmedt-Aristizabal, Xuesong Li, Lars Petersson, Mehrtash Harandi
Real-world systems often encounter new data over time, which leads to experiencing target domain shifts. Existing Test-Time Adaptation (TTA) methods tend to apply computationally heavy and memory-intensive backpropagation-based approaches to handle this. Here, we propose a novel method that uses a backpropagation-free approach for TTA for the specific case of 3D data. Our model uses a two-stream architecture to maintain knowledge about the source domain as well as complementary target-domain-specific information. The backpropagation-free property of our model helps address the well-known forgetting problem and mitigates the error accumulation issue. The proposed method also eliminates the need for the usually noisy process of pseudo-labeling and reliance on costly self-supervised training. Moreover, our method leverages subspace learning, effectively reducing the distribution variance between the two domains. Furthermore, the source-domain-specific and the target-domain-specific streams are aligned using a novel entropy-based adaptive fusion strategy. Extensive experiments on popular benchmarks demonstrate the effectiveness of our method. The code will be available at url{https://github.com/abie-e/BFTT3D}.
Read more4/26/2024
0
Enhancing Test Time Adaptation with Few-shot Guidance
Siqi Luo, Yi Xin, Yuntao Du, Zhongwei Wan, Tao Tan, Guangtao Zhai, Xiaohong Liu
Deep neural networks often encounter significant performance drops while facing with domain shifts between training (source) and test (target) data. To address this issue, Test Time Adaptation (TTA) methods have been proposed to adapt pre-trained source model to handle out-of-distribution streaming target data. Although these methods offer some relief, they lack a reliable mechanism for domain shift correction, which can often be erratic in real-world applications. In response, we develop Few-Shot Test Time Adaptation (FS-TTA), a novel and practical setting that utilizes a few-shot support set on top of TTA. Adhering to the principle of few inputs, big gains, FS-TTA reduces blind exploration in unseen target domains. Furthermore, we propose a two-stage framework to tackle FS-TTA, including (i) fine-tuning the pre-trained source model with few-shot support set, along with using feature diversity augmentation module to avoid overfitting, (ii) implementing test time adaptation based on prototype memory bank guidance to produce high quality pseudo-label for model adaptation. Through extensive experiments on three cross-domain classification benchmarks, we demonstrate the superior performance and reliability of our FS-TTA and framework.
Read more9/4/2024
0
Test-time adaptation for geospatial point cloud semantic segmentation with distinct domain shifts
Puzuo Wang, Wei Yao, Jie Shao, Zhiyi He
Domain adaptation (DA) techniques help deep learning models generalize across data shifts for point cloud semantic segmentation (PCSS). Test-time adaptation (TTA) allows direct adaptation of a pre-trained model to unlabeled data during inference stage without access to source data or additional training, avoiding privacy issues and large computational resources. We address TTA for geospatial PCSS by introducing three domain shift paradigms: photogrammetric to airborne LiDAR, airborne to mobile LiDAR, and synthetic to mobile laser scanning. We propose a TTA method that progressively updates batch normalization (BN) statistics with each testing batch. Additionally, a self-supervised learning module optimizes learnable BN affine parameters. Information maximization and reliability-constrained pseudo-labeling improve prediction confidence and supply supervisory signals. Experimental results show our method improves classification accuracy by up to 20% mIoU, outperforming other methods. For photogrammetric (SensatUrban) to airborne (Hessigheim 3D) adaptation at the inference stage, our method achieves 59.46% mIoU and 85.97% OA without retraining or fine-turning.
Read more7/9/2024
0
Domain-Specific Block Selection and Paired-View Pseudo-Labeling for Online Test-Time Adaptation
Yeonguk Yu, Sungho Shin, Seunghyeok Back, Minhwan Ko, Sangjun Noh, Kyoobin Lee
Test-time adaptation (TTA) aims to adapt a pre-trained model to a new test domain without access to source data after deployment. Existing approaches typically rely on self-training with pseudo-labels since ground-truth cannot be obtained from test data. Although the quality of pseudo labels is important for stable and accurate long-term adaptation, it has not been previously addressed. In this work, we propose DPLOT, a simple yet effective TTA framework that consists of two components: (1) domain-specific block selection and (2) pseudo-label generation using paired-view images. Specifically, we select blocks that involve domain-specific feature extraction and train these blocks by entropy minimization. After blocks are adjusted for current test domain, we generate pseudo-labels by averaging given test images and corresponding flipped counterparts. By simply using flip augmentation, we prevent a decrease in the quality of the pseudo-labels, which can be caused by the domain gap resulting from strong augmentation. Our experimental results demonstrate that DPLOT outperforms previous TTA methods in CIFAR10-C, CIFAR100-C, and ImageNet-C benchmarks, reducing error by up to 5.4%, 9.1%, and 2.9%, respectively. Also, we provide an extensive analysis to demonstrate effectiveness of our framework. Code is available at https://github.com/gist-ailab/domain-specific-block-selection-and-paired-view-pseudo-labeling-for-online-TTA.
Read more5/8/2024