Design and Control of a Novel Six-Degree-of-Freedom Hybrid Robotic Arm
0
Sign in to get full access
Overview
- This paper presents the design and control of a novel six-degree-of-freedom (6-DoF) hybrid robotic arm.
- The robotic arm combines the advantages of serial and parallel mechanisms to achieve high dexterity and versatility.
- The team developed a custom kinematic model and control system to enable precise and accurate manipulation.
- Experiments demonstrate the robotic arm's capabilities in various tasks, including object manipulation and assembly.
Plain English Explanation
This paper describes the creation of a new type of robotic arm that can move and bend in six different directions. The researchers combined two common robotic arm designs - serial and parallel - to get the benefits of both. The serial design allows for a large range of motion, while the parallel design provides more precise control.
The team developed a custom mathematical model to describe how this hybrid robotic arm moves and a control system to make it work smoothly. They then tested the arm by having it perform various tasks like picking up and assembling objects. The results show that this new robotic arm design is highly dexterous and versatile, capable of carrying out complex manipulations with a high degree of accuracy.
Technical Explanation
The paper presents the design and control of a novel 6-DoF hybrid robotic arm. The robotic arm combines the advantages of serial and parallel mechanisms to achieve high dexterity and versatility.
The researchers developed a custom kinematic model and control system to enable precise and accurate manipulation. The model accounts for the complex kinematics of the hybrid design, allowing for efficient trajectory planning and control.
Experiments were conducted to evaluate the robotic arm's capabilities in various tasks, including object manipulation and assembly. The results demonstrate the arm's high dexterity and versatility in performing complex motions with a high degree of accuracy.
Critical Analysis
The paper provides a thorough design and control optimization of the novel 6-DoF hybrid robotic arm. However, the researchers do not discuss any potential limitations or tradeoffs of the hybrid design compared to traditional serial or parallel robots.
Additionally, the experimental evaluation could be expanded to include more challenging tasks or real-world scenarios to further validate the arm's capabilities. Exploring the robustness of the control system to uncertainties or disturbances would also be valuable.
Overall, the paper presents a promising new robotic arm design with potential applications in areas requiring high dexterity and precision, such as industrial automation, surgical robotics, and assistive technologies.
Conclusion
This paper introduces a novel 6-DoF hybrid robotic arm that combines the advantages of serial and parallel mechanisms. The researchers developed a custom kinematic model and control system to enable precise and accurate manipulation, as demonstrated through experiments. While the paper provides a thorough technical explanation, further analysis of the design's limitations and robustness would be valuable. Overall, this work presents a promising step towards more dexterous and versatile robotic systems.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Design and Control of a Novel Six-Degree-of-Freedom Hybrid Robotic Arm
Yang Chen, Zhonghua Miao, Yuanyue Ge, Sen lin, Liping Chen, Ya Xiong
Robotic arms are key components in fruit-harvesting robots. In agricultural settings, conventional serial or parallel robotic arms often fall short in meeting the demands for a large workspace, rapid movement, enhanced capability of obstacle avoidance and affordability. This study proposes a novel hybrid six-degree-of-freedom (DoF) robotic arm that combines the advantages of parallel and serial mechanisms. Inspired by yoga, we designed two sliders capable of moving independently along a single rail, acting as two feet. These sliders are interconnected with linkages and a meshed-gear set, allowing the parallel mechanism to lower itself and perform a split to pass under obstacles. This unique feature allows the arm to avoid obstacles such as pipes, tables and beams typically found in greenhouses. Integrated with serially mounted joints, the patented hybrid arm is able to maintain the end's pose even when it moves with a mobile platform, facilitating fruit picking with the optimal pose in dynamic conditions. Moreover, the hybrid arm's workspace is substantially larger, being almost three times the volume of UR3 serial arms and fourteen times that of the ABB IRB parallel arms. Experiments show that the repeatability errors are 0.017 mm, 0.03 mm and 0.109 mm for the two sliders and the arm's end, respectively, providing sufficient precision for agricultural robots.
Read more7/30/2024
๐งช
0
A Balanced Positional Control Architecture for a 12-DoF Quadruped Robot through Simulation-validation and Hardware Testing
Abid Shahriar
A multi-joint enabled robot requires extensive mathematical calculations to determine the end effector's position with respect to the other connective joints involved and their corresponding frames in a specific coordinate system. If a control architecture employs fewer positional constraints which cannot precisely determine the end effector's position in all quadrants of a 2D Cartesian plane then the robot is generally under-constrained, leading to challenges in accurate positioning to the end-effector across the entire plane. Consequently, only a subset of the end effector's degree of freedom (DoF) can be assigned for the robot's leg position for pose and trajectory estimation purposes. This paper introduces a novel approach and proposes an algorithm to consider a balanced control of the robot's leg position in a coordinate system so the robot's leg can be precisely determined and the DoF is not limited. Mathematical derivation of the joint angles is derived with forward and inverse kinematics, and Python-based simulation has been done to verify and simulate the robot's locomotion. Using Python-based code for serial communication with a micro-controller unit makes this approach more effective for demonstrating its application on a prototype leg its movement has been realized. The experimental prototype leg exhibits a commendable 78.9% accuracy with the simulated result, validating the robustness of our algorithm in practical scenarios. A comprehensive assessment of the control algorithm with random and continuous data point test has been conducted to ensure performance, so the algorithm can as well be deployed in a physical robot.
Read more8/1/2024
0
1 Modular Parallel Manipulator for Long-Term Soft Robotic Data Collection
Kiyn Chin, Carmel Majidi, Abhinav Gupta
Performing long-term experimentation or large-scale data collection for machine learning in the field of soft robotics is challenging, due to the hardware robustness and experimental flexibility required. In this work, we propose a modular parallel robotic manipulation platform suitable for such large-scale data collection and compatible with various soft-robotic fabrication methods. Considering the computational and theoretical difficulty of replicating the high-fidelity, faster-than-real-time simulations that enable large-scale data collection in rigid robotic systems, a robust soft-robotic hardware platform becomes a high priority development task for the field. The platform's modules consist of a pair of off-the-shelf electrical motors which actuate a customizable finger consisting of a compliant parallel structure. The parallel mechanism of the finger can be as simple as a single 3D-printed urethane or molded silicone bulk structure, due to the motors being able to fully actuate a passive structure. This design flexibility allows experimentation with soft mechanism varied geometries, bulk properties and surface properties. Additionally, while the parallel mechanism does not require separate electronics or additional parts, these can be included, and it can be constructed using multi-functional soft materials to study compatible soft sensors and actuators in the learning process. In this work, we validate the platform's ability to be used for policy gradient reinforcement learning directly on hardware in a benchmark 2D manipulation task. We additionally demonstrate compatibility with multiple fingers and characterize the design constraints for compatible extensions.
Read more9/6/2024
0
Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm
Xinda Qi, Yu Mei, Dong Chen, Zhaojian Li, Xiaobo Tan
We propose a novel multi-section cable-driven soft robotic arm inspired by octopus tentacles along with a new modeling approach. Each section of the modular manipulator is made of a soft tubing backbone, a soft silicon arm body, and two rigid endcaps, which connect adjacent sections and decouple the actuation cables of different sections. The soft robotic arm is made with casting after the rigid endcaps are 3D-printed, achieving low-cost and convenient fabrication. To capture the nonlinear effect of cables pushing into the soft silicon arm body, which results from the absence of intermediate rigid cable guides for higher compliance, an analytical static model is developed to capture the relationship between the bending curvature and the cable lengths. The proposed model shows superior prediction performance in experiments over that of a baseline model, especially under large bending conditions. Based on the nonlinear static model, a kinematic model of a multi-section arm is further developed and used to derive a motion planning algorithm. Experiments show that the proposed soft arm has high flexibility and a large workspace, and the tracking errors under the algorithm based on the proposed modeling approach are up to 52$%$ smaller than those with the algorithm derived from the baseline model. The presented modeling approach is expected to be applicable to a broad range of soft cable-driven actuators and manipulators.
Read more5/17/2024