Dynamic Ego-Velocity estimation Using Moving mmWave Radar: A Phase-Based Approach
2404.09691
0
0
Abstract
Precise ego-motion measurement is crucial for various applications, including robotics, augmented reality, and autonomous navigation. In this poster, we propose mmPhase, an odometry framework based on single-chip millimetre-wave (mmWave) radar for robust ego-motion estimation in mobile platforms without requiring additional modalities like the visual, wheel, or inertial odometry. mmPhase leverages a phase-based velocity estimation approach to overcome the limitations of conventional doppler resolution. For real-world evaluations of mmPhase we have developed an ego-vehicle prototype. Compared to the state-of-the-art baselines, mmPhase shows superior performance in ego-velocity estimation.
Create account to get full access
Overview
- This research paper presents a novel approach for estimating the ego-velocity of a moving vehicle using a millimeter-wave (mmWave) radar sensor.
- The proposed method leverages the phase information from the radar signals to dynamically estimate the vehicle's velocity, rather than relying solely on Doppler measurements.
- The researchers evaluate their approach through experiments and demonstrate its effectiveness in accurately tracking the ego-velocity of a moving platform.
Plain English Explanation
Estimating the velocity of a moving vehicle, known as the "ego-velocity," is an important task in various applications such as autonomous driving and navigation. Traditionally, Doppler measurements from radar sensors have been used to determine the ego-velocity. However, this approach can be inaccurate, especially in dynamic environments.
The researchers in this paper have developed a new way to estimate the ego-velocity using mmWave radar sensors. Instead of just looking at the Doppler effect, their method also considers the phase information from the radar signals. By combining these two sources of information, they can more accurately track the changing velocity of the vehicle as it moves.
The researchers tested their approach in real-world experiments and showed that it can reliably estimate the ego-velocity of a moving platform. This is an important advancement in radar odometry, as it can help improve the performance of autonomous systems that rely on accurate velocity measurements, such as target prediction and point cloud super-resolution.
Technical Explanation
The researchers' proposed method is based on a phase-based approach for estimating the ego-velocity of a moving platform using a mmWave radar sensor. Unlike traditional Doppler-based techniques, which can be affected by environmental factors and sensor motion, their approach combines Doppler information with the phase changes observed in the radar signals.
The key steps of their methodology are:
- Radar signal processing to extract the Doppler and phase information from the received radar echoes.
- Leveraging the phase changes over time to estimate the relative motion of the radar sensor with respect to the observed scene.
- Combining the phase-based velocity estimation with the Doppler measurements to obtain a more accurate and dynamic estimate of the ego-velocity.
The researchers evaluated their approach through experimental validation, where they mounted the mmWave radar on a moving platform and compared the estimated ego-velocity to ground truth measurements. Their results demonstrated the improved accuracy and robustness of the phase-based ego-velocity estimation compared to traditional Doppler-only methods, especially in scenarios with rapid changes in velocity.
Critical Analysis
The researchers acknowledge the potential limitations of their approach, such as the need for accurate initial position and orientation information, as well as the sensitivity of the phase-based estimation to environmental factors like multipath effects and sensor vibrations.
Additionally, the paper does not provide a detailed analysis of the computational complexity and real-time performance of the proposed algorithm, which would be crucial for its deployment in practical applications like autonomous vehicles.
Further research could explore ways to mitigate these limitations, such as incorporating sensor fusion techniques or advanced signal processing methods to enhance the robustness and reliability of the phase-based ego-velocity estimation. Comparisons to other Doppler-based velocity measurement techniques or optimization-based system identification approaches would also provide valuable insights into the relative strengths and weaknesses of the proposed approach.
Conclusion
This research paper presents a novel phase-based approach for estimating the ego-velocity of a moving platform using a mmWave radar sensor. By combining Doppler information with phase changes in the radar signals, the researchers demonstrate an improved accuracy and robustness in tracking the dynamic velocity of the vehicle compared to traditional Doppler-only methods.
The proposed technique represents an important advancement in the field of radar-based ego-motion estimation, which is crucial for various applications such as autonomous driving and navigation. Further research and development in this area can help enhance the performance and reliability of these systems, ultimately leading to safer and more efficient autonomous vehicles and robotic platforms.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
š²
Radarize: Enhancing Radar SLAM with Generalizable Doppler-Based Odometry
Emerson Sie, Xinyu Wu, Heyu Guo, Deepak Vasisht
0
0
Millimeter-wave (mmWave) radar is increasingly being considered as an alternative to optical sensors for robotic primitives like simultaneous localization and mapping (SLAM). While mmWave radar overcomes some limitations of optical sensors, such as occlusions, poor lighting conditions, and privacy concerns, it also faces unique challenges, such as missed obstacles due to specular reflections or fake objects due to multipath. To address these challenges, we propose Radarize, a self-contained SLAM pipeline that uses only a commodity single-chip mmWave radar. Our radar-native approach uses techniques such as Doppler shift-based odometry and multipath artifact suppression to improve performance. We evaluate our method on a large dataset of 146 trajectories spanning 4 buildings and mounted on 3 different platforms, totaling approximately 4.7 Km of travel distance. Our results show that our method outperforms state-of-the-art radar and radar-inertial approaches by approximately 5x in terms of odometry and 8x in terms of end-to-end SLAM, as measured by absolute trajectory error (ATE), without the need for additional sensors such as IMUs or wheel encoders.
4/30/2024
EFEAR-4D: Ego-Velocity Filtering for Efficient and Accurate 4D radar Odometry
Xiaoyi Wu, Yushuai Chen, Zhan Li, Ziyang Hong, Liang Hu
0
0
Odometry is a crucial component for successfully implementing autonomous navigation, relying on sensors such as cameras, LiDARs and IMUs. However, these sensors may encounter challenges in extreme weather conditions, such as snowfall and fog. The emergence of FMCW radar technology offers the potential for robust perception in adverse conditions. As the latest generation of FWCW radars, the 4D mmWave radar provides point cloud with range, azimuth, elevation, and Doppler velocity information, despite inherent sparsity and noises in the point cloud. In this paper, we propose EFEAR-4D, an accurate, highly efficient, and learning-free method for large-scale 4D radar odometry estimation. EFEAR-4D exploits Doppler velocity information delicately for robust ego-velocity estimation, resulting in a highly accurate prior guess. EFEAR-4D maintains robustness against point-cloud sparsity and noises across diverse environments through dynamic object removal and effective region-wise feature extraction. Extensive experiments on two publicly available 4D radar datasets demonstrate state-of-the-art reliability and localization accuracy of EFEAR-4D under various conditions. Furthermore, we have collected a dataset following the same route but varying installation heights of the 4D radar, emphasizing the significant impact of radar height on point cloud quality - a crucial consideration for real-world deployments. Our algorithm and dataset will be available soon at https://github.com/CLASS-Lab/EFEAR-4D.
5/17/2024
New!RAVE: A Framework for Radar Ego-Velocity Estimation
Vlaho-Josip v{S}tironja, Luka Petrovi'c, Juraj Perv{s}i'c, Ivan Markovi'c, Ivan Petrovi'c
0
0
State estimation is an essential component of autonomous systems, usually relying on sensor fusion that integrates data from cameras, LiDARs and IMUs. Recently, radars have shown the potential to improve the accuracy and robustness of state estimation and perception, especially in challenging environmental conditions such as adverse weather and low-light scenarios. In this paper, we present a framework for ego-velocity estimation, which we call RAVE, that relies on 3D automotive radar data and encompasses zero velocity detection, outlier rejection, and velocity estimation. In addition, we propose a simple filtering method to discard infeasible ego-velocity estimates. We also conduct a systematic analysis of how different existing outlier rejection techniques and optimization loss functions impact estimation accuracy. Our evaluation on three open-source datasets demonstrates the effectiveness of the proposed filter and a significant positive impact of RAVE on the odometry accuracy. Furthermore, we release an open-source implementation of the proposed framework for radar ego-velocity estimation accompanied with a ROS interface.
6/28/2024
š¶
Advancements in Radar Odometry
Matteo Frosi, Mirko Usuelli, Matteo Matteucci
0
0
Radar odometry estimation has emerged as a critical technique in the field of autonomous navigation, providing robust and reliable motion estimation under various environmental conditions. Despite its potential, the complex nature of radar signals and the inherent challenges associated with processing these signals have limited the widespread adoption of this technology. This paper aims to address these challenges by proposing novel improvements to an existing method for radar odometry estimation, designed to enhance accuracy and reliability in diverse scenarios. Our pipeline consists of filtering, motion compensation, oriented surface points computation, smoothing, one-to-many radar scan registration, and pose refinement. The developed method enforces local understanding of the scene, by adding additional information through smoothing techniques, and alignment of consecutive scans, as a refinement posterior to the one-to-many registration. We present an in-depth investigation of the contribution of each improvement to the localization accuracy, and we benchmark our system on the sequences of the main datasets for radar understanding, i.e., the Oxford Radar RobotCar, MulRan, and Boreas datasets. The proposed pipeline is able to achieve superior results, on all scenarios considered and under harsh environmental constraints.
4/8/2024