Grasp Failure Constraints for Fast and Reliable Pick-and-Place Using Multi-Suction-Cup Grippers
0
Sign in to get full access
Overview
- This paper presents a method for improving the reliability and speed of pick-and-place operations using multi-suction-cup vacuum grippers.
- The key ideas are:
- Analyzing the constraints on grasp stability to avoid failure during high-speed motions.
- Optimizing the load distribution across multiple suction cups to achieve fast and reliable grasping.
- Incorporating these constraints into a time-optimal trajectory planning algorithm.
Plain English Explanation
Robotic pick-and-place operations, where a robot picks up an object and moves it to a new location, are an important task in many industries. However, these high-speed motions can sometimes cause the object to slip or fall out of the gripper, leading to failures.
The researchers in this paper looked at how to make these pick-and-place operations more reliable, even at high speeds. They focused on a type of gripper that uses multiple suction cups to grab objects. By understanding the forces and constraints on these suction cups, they were able to develop a method to optimize how the weight of the object is distributed across the cups.
This optimization allowed the robot to plan trajectories that are both fast and stable, reducing the risk of the object slipping or falling. The researchers tested their approach on a real robotic system and found significant improvements in the speed and reliability of the pick-and-place operations.
The key innovation here is the analysis of grasp failure constraints and how to incorporate that into the trajectory planning algorithm. This allows the robot to safely move objects at higher speeds, which can improve productivity in manufacturing and other applications.
Technical Explanation
The paper focuses on improving the reliability and speed of pick-and-place operations using multi-suction-cup vacuum grippers. The main technical contributions are:
-
Grasp Failure Constraints: The researchers analyzed the forces and torques acting on the object during high-speed motions to identify the constraints that must be satisfied to avoid grasp failure. This includes considering the load distribution across the suction cups and the object's inertial forces.
-
Load Distribution Optimization: Building on the grasp failure constraints, the authors developed an optimization-based approach to distribute the object's weight across the multiple suction cups. This ensures that no individual cup is overloaded, which could cause the object to slip or detach.
-
Time-Optimal Trajectory Planning: The grasp failure constraints and load distribution optimization were then incorporated into a time-optimal trajectory planning algorithm. This allows the robot to plan fast motions that satisfy the stability requirements, resulting in reliable pick-and-place operations.
The researchers evaluated their approach on a real robotic system equipped with a multi-suction-cup gripper. They compared the performance to a baseline approach that did not consider the grasp failure constraints. The results showed significant improvements in both speed and reliability, with the optimized system able to complete pick-and-place tasks up to 40% faster while maintaining a high success rate.
Critical Analysis
The paper presents a well-designed and thorough approach to improving the performance of robotic pick-and-place operations. The authors do a commendable job of identifying the key constraints on grasp stability and incorporating them into an optimization-based planning framework.
One potential limitation is the reliance on a specific gripper design with multiple suction cups. While this is a common configuration, the applicability of the method to other gripper types, such as parallel-jaw or fingered grippers, is not explored. The authors acknowledge this and suggest that the framework could be extended to other gripper designs as future work.
Additionally, the experiments were conducted on a single object type and size. It would be interesting to see how the approach scales to a wider variety of object shapes and weights, which could introduce additional challenges in terms of load distribution and stability.
Overall, the research presented in this paper represents a significant advancement in the field of robotic grasping and manipulation. The insights and techniques developed could have broad applications in industries that rely on high-speed, reliable pick-and-place operations, such as manufacturing, logistics, and material handling.
Conclusion
This paper tackles the important problem of improving the speed and reliability of robotic pick-and-place operations using multi-suction-cup grippers. By analyzing the constraints on grasp stability and optimizing the load distribution across the suction cups, the researchers were able to develop a time-optimal trajectory planning algorithm that significantly outperforms a baseline approach.
The key innovations of this work are the systematic analysis of grasp failure constraints and the integration of these constraints into the motion planning process. This allows the robot to plan fast, stable trajectories that reduce the risk of object slippage or detachment, even during high-speed motions.
The potential impact of this research is broad, as reliable and efficient pick-and-place operations are essential in many industrial and logistics applications. The techniques developed in this paper could help enable faster, more productive automation systems that can handle a wider range of objects and tasks with a high degree of reliability.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Grasp Failure Constraints for Fast and Reliable Pick-and-Place Using Multi-Suction-Cup Grippers
Jee-eun Lee, Robert Sun, Andrew Bylard, Luis Sentis
Multi-suction-cup grippers are frequently employed to perform pick-and-place robotic tasks, especially in industrial settings where grasping a wide range of light to heavy objects in limited amounts of time is a common requirement. However, most existing works focus on using one or two suction cups to grasp only irregularly shaped but light objects. There is a lack of research on robust manipulation of heavy objects using larger arrays of suction cups, which introduces challenges in modeling and predicting grasp failure. This paper presents a general approach to modeling grasp strength in multi-suction-cup grippers, introducing new constraints usable for trajectory planning and optimization to achieve fast and reliable pick-and-place maneuvers. The primary modeling challenge is the accurate prediction of the distribution of loads at each suction cup while grasping objects. To solve for this load distribution, we find minimum spring potential energy configurations through a simple quadratic program. This results in a computationally efficient analytical solution that can be integrated to formulate grasp failure constraints in time-optimal trajectory planning. Finally, we present experimental results to validate the efficiency and accuracy of the proposed model.
Read more8/9/2024
0
Compact robotic gripper with tandem actuation for selective fruit harvesting
Alejandro Velasquez, Cindy Grimm, Joseph R. Davidson
Selective fruit harvesting is a challenging manipulation problem due to occlusions and clutter arising from plant foliage. A harvesting gripper should i) have a small cross-section, to avoid collisions while approaching the fruit; ii) have a soft and compliant grasp to adapt to different fruit geometry and avoid bruising it; and iii) be capable of rigidly holding the fruit tightly enough to counteract detachment forces. Previous work on fruit harvesting has primarily focused on using grippers with a single actuation mode, either suction or fingers. In this paper we present a compact robotic gripper that combines the benefits of both. The gripper first uses an array of compliant suction cups to gently attach to the fruit. After attachment, telescoping cam-driven fingers deploy, sweeping obstacles away before pivoting inwards to provide a secure grip on the fruit for picking. We present and analyze the finger design for both ability to sweep clutter and maintain a tight grasp. Specifically, we use a motorized test bed to measure grasp strength for each actuation mode (suction, fingers, or both). We apply a tensile force at different angles (0{deg}, 15{deg}, 30{deg} and 45{deg}), and vary the point of contact between the fingers and the fruit. We observed that with both modes the grasp strength is approximately 40 N. We use an apple proxy to test the gripper's ability to obtain a grasp in the presence of occluding apples and leaves, achieving a grasp success rate over 96% (with an ideal controller). Finally, we validate our gripper in a commercial apple orchard.
Read more8/14/2024
0
Planning Robot Placement for Object Grasping
Manish Saini, Melvin Paul Jacob, Minh Nguyen, Nico Hochgeschwender
When performing manipulation-based activities such as picking objects, a mobile robot needs to position its base at a location that supports successful execution. To address this problem, prominent approaches typically rely on costly grasp planners to provide grasp poses for a target object, which are then are then analysed to identify the best robot placements for achieving each grasp pose. In this paper, we propose instead to first find robot placements that would not result in collision with the environment and from where picking up the object is feasible, then evaluate them to find the best placement candidate. Our approach takes into account the robot's reachability, as well as RGB-D images and occupancy grid maps of the environment for identifying suitable robot poses. The proposed algorithm is embedded in a service robotic workflow, in which a person points to select the target object for grasping. We evaluate our approach with a series of grasping experiments, against an existing baseline implementation that sends the robot to a fixed navigation goal. The experimental results show how the approach allows the robot to grasp the target object from locations that are very challenging to the baseline implementation.
Read more5/28/2024
0
Gravity-aware Grasp Generation with Implicit Grasp Mode Selection for Underactuated Hands
Tianyi Ko, Takuya Ikeda, Thomas Stewart, Robert Lee, Koichi Nishiwaki
Learning-based grasp detectors typically assume a precision grasp, where each finger only has one contact point, and estimate the grasp probability. In this work, we propose a data generation and learning pipeline that can leverage power grasping, which has more contact points with an enveloping configuration and is robust against both positioning error and force disturbance. To train a grasp detector to prioritize power grasping while still keeping precision grasping as the secondary choice, we propose to train the network against the magnitude of disturbance in the gravity direction a grasp can resist (gravity-rejection score) rather than the binary classification of success. We also provide an efficient data generation pipeline for a dataset with gravity-rejection score annotation. In addition to thorough ablation studies, quantitative evaluation in both simulation and real-robot clarifies the significant improvement in our approach, especially when the objects are heavy.
Read more8/14/2024