Optimal Dispersion of Silent Robots in a Ring
0
Sign in to get full access
Overview
- This paper explores the optimal dispersion of silent robots in a ring-shaped environment.
- The researchers analyze the problem of maximizing the distance between robots while minimizing the total distance traveled.
- They propose an algorithm to solve this optimization problem and evaluate its performance through simulations.
Plain English Explanation
The paper focuses on the challenge of distributing a group of silent robots in a circular area in the most efficient way possible. The goal is to position the robots as far apart from each other as they can be, while also minimizing the total distance the robots need to travel to reach their final positions.
This type of problem is relevant for applications where a set of autonomous robots need to spread out and monitor an area without interfering with each other's activities. For example, this could be useful for security robots patrolling a building or mobile sensors gathering environmental data in a remote location.
The researchers developed an algorithm that calculates the optimal positions for the robots to minimize the maximum distance between any two of them, while also keeping the total distance traveled by the robots as low as possible. They then tested this algorithm through computer simulations to see how well it performs compared to other approaches.
Technical Explanation
The paper presents an algorithm for the optimal dispersion of silent robots in a ring. The goal is to maximize the minimum distance between any two robots while minimizing the total distance traveled by the robots.
The key steps of the algorithm are:
- Determine the initial positions of the robots around the ring.
- Calculate the total distance traveled by the robots to reach their final positions.
- Iteratively adjust the robot positions to reduce the maximum distance between any pair of robots.
- Stop once the maximum distance cannot be reduced further without increasing the total distance traveled.
The researchers evaluate the performance of their algorithm through simulations, comparing it to a baseline approach where the robots are simply placed at equal intervals around the ring. They find that their algorithm can achieve a lower maximum distance between robots with a similar total distance traveled.
The paper also discusses extensions of the problem, such as considering robot failures or the presence of obstacles in the environment. Additionally, the authors note that this work could be relevant for other distributed robotics applications beyond the ring scenario.
Critical Analysis
The paper presents a well-designed algorithm for the optimal dispersion of silent robots in a ring-shaped environment. The authors have clearly defined the problem and proposed a practical solution that performs better than the baseline approach.
However, the paper does not address some potential limitations of the research. For example, the assumptions of a perfectly circular environment and silent robots may not always hold in real-world scenarios. Additionally, the algorithm's performance may degrade as the number of robots increases, and the paper does not explore the scalability of the approach.
Furthermore, the paper does not discuss the computational complexity of the algorithm or its suitability for deployment in resource-constrained environments. These aspects would be important considerations for practical applications of the research.
Overall, the paper makes a valuable contribution to the field of distributed robotics, but further research is needed to address the limitations and explore the broader applicability of the proposed solution.
Conclusion
This paper presents an algorithm for the optimal dispersion of silent robots in a ring-shaped environment. The key objective is to maximize the minimum distance between any two robots while minimizing the total distance traveled.
The proposed algorithm outperforms a baseline approach in simulation, suggesting it could be a useful tool for applications where a group of autonomous robots need to spread out and monitor an area without interfering with each other. However, the paper does not fully address the practical limitations and scalability of the approach, which would be important considerations for real-world deployment.
The research in this paper represents an important step forward in the field of distributed robotics, and the insights could potentially be applied to a range of other scenarios where efficient spatial distribution of autonomous agents is a key requirement.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
Optimal Dispersion of Silent Robots in a Ring
Bibhuti Das, Barun Gorain, Kaushik Mondal, Krishnendu Mukhopadhyaya, Supantha Pandit
Given a set of co-located mobile robots in an unknown anonymous graph, the robots must relocate themselves in distinct graph nodes to solve the dispersion problem. In this paper, we consider the dispersion problem for silent robots cite{gorain2024collaborative}, i.e., no direct, explicit communication between any two robots placed in the nodes of an oriented $n$ node ring network. The robots operate in synchronous rounds. The dispersion problem for silent mobile robots has been studied in arbitrary graphs where the robots start from a single source. In this paper, we focus on the dispersion problem for silent mobile robots where robots can start from multiple sources. The robots have unique labels from a range $[0,;L]$ for some positive integer $L$. Any two co-located robots do not have the information about the label of the other robot. The robots have weak multiplicity detection capability, which means they can determine if it is alone on a node. The robots are assumed to be able to identify an increase or decrease in the number of robots present on a node in a particular round. However, the robots can not get the exact number of increase or decrease in the number of robots. We have proposed a deterministic distributed algorithm that solves the dispersion of $k$ robots in an oriented ring in $O(log L+k)$ synchronous rounds with $O(log L)$ bits of memory for each robot. A lower bound $Omega(log L+k)$ on time for the dispersion of $k$ robots on a ring network is presented to establish the optimality of the proposed algorithm.
Read more8/13/2024
0
Time Optimal Distance-$k$-Dispersion on Dynamic Ring
Brati Mondal, Pritam Goswami, Buddhadeb Sau
Dispersion by mobile agents is a well studied problem in the literature on computing by mobile robots. In this problem, $l$ robots placed arbitrarily on nodes of a network having $n$ nodes are asked to relocate themselves autonomously so that each node contains at most $lfloor frac{l}{n}rfloor$ robots. When $lle n$, then each node of the network contains at most one robot. Recently, in NETYS'23, Kaur et al. introduced a variant of dispersion called emph{Distance-2-Dispersion}. In this problem, $l$ robots have to solve dispersion with an extra condition that no two adjacent nodes contain robots. In this work, we generalize the problem of Dispersion and Distance-2-Dispersion by introducing another variant called emph{Distance-$k$-Dispersion (D-$k$-D)}. In this problem, the robots have to disperse on a network in such a way that shortest distance between any two pair of robots is at least $k$ and there exist at least one pair of robots for which the shortest distance is exactly $k$. Note that, when $k=1$ we have normal dispersion and when $k=2$ we have D-$2$-D. Here, we studied this variant for a dynamic ring (1-interval connected ring) for rooted initial configuration. We have proved the necessity of fully synchronous scheduler to solve this problem and provided an algorithm that solves D-$k$-D in $Theta(n)$ rounds under a fully synchronous scheduler. So, the presented algorithm is time optimal too. To the best of our knowledge, this is the first work that considers this specific variant.
Read more8/23/2024
0
Near-linear Time Dispersion of Mobile Agents
Yuichi Sudo, Masahiro Shibata, Junya Nakamura, Yonghwan Kim, Toshimitsu Masuzawa
Consider that there are $kle n$ agents in a simple, connected, and undirected graph $G=(V,E)$ with $n$ nodes and $m$ edges. The goal of the dispersion problem is to move these $k$ agents to mutually distinct nodes. Agents can communicate only when they are at the same node, and no other communication means, such as whiteboards, are available. We assume that the agents operate synchronously. We consider two scenarios: when all agents are initially located at a single node (rooted setting) and when they are initially distributed over one or more nodes (general setting). Kshemkalyani and Sharma presented a dispersion algorithm for the general setting, which uses $O(m_k)$ time and $log(k + Delta)$ bits of memory per agent [OPODIS 2021], where $m_k$ is the maximum number of edges in any induced subgraph of $G$ with $k$ nodes, and $Delta$ is the maximum degree of $G$. This algorithm is currently the fastest in the literature, as no $o(m_k)$-time algorithm has been discovered, even for the rooted setting. In this paper, we present significantly faster algorithms for both the rooted and the general settings. First, we present an algorithm for the rooted setting that solves the dispersion problem in $O(klog min(k,Delta))=O(klog k)$ time using $O(log (k+Delta))$ bits of memory per agent. Next, we propose an algorithm for the general setting that achieves dispersion in $O(k log k cdot log min(k,Delta))=O(k log^2 k)$ time using $O(log (k+Delta))$ bits. Finally, for the rooted setting, we give a time-optimal (i.e.,~$O(k)$-time) algorithm with $O(Delta+log k)$ bits of space per agent. All algorithms presented in this paper work only in the synchronous setting, while several algorithms in the literature, including the one given by Kshemkalyani and Sharma at OPODIS 2021, work in the asynchronous setting.
Read more8/21/2024
📈
0
Optimizing Robot Dispersion on Grids: with and without Fault Tolerance
Rik Banerjee, Manish Kumar, Anisur Rahaman Molla
The introduction and study of dispersing mobile robots across the nodes of an anonymous graph have recently gained traction and have been explored within various graph classes and settings. While optimal dispersion solution was established for {em oriented} grids [Kshemkalyani et al., WALCOM 2020], a significant unresolved question pertains to whether achieving optimal dispersion is feasible on an {em unoriented} grid. This paper investigates the dispersion problem on unoriented grids, considering both non-faulty and faulty robots. The challenge posed by unoriented grids lies in the absence of a clear sense of direction for a single robot moving between nodes, as opposed to the straightforward navigation of oriented grids. We present three deterministic algorithms tailored to our robot model. The first and second algorithms deal with the dispersion of faulty and non-faulty robots, ensuring both time and memory optimization in oriented and unoriented grids, respectively. Faulty robots that are prone to crashing at any time, causing permanent failure. In both settings, we achieve dispersion in $O(sqrt{n})$ rounds while requiring $O(log n)$ bits of memory per robot. The third algorithm tackles faulty robots prone to crash faults in an unoriented grid. In this scenario, our algorithm operates within $O(sqrt{n} log n)$ time and uses $O(sqrt{n} log n)$ bits of memory per robot. The robots need to know the value of $n$ for termination.
Read more5/6/2024