ProbRadarM3F: mmWave Radar based Human Skeletal Pose Estimation with Probability Map Guided Multi-Format Feature Fusion
0
🎲
Sign in to get full access
Overview
- Millimeter wave (mmWave) radar is a non-intrusive, private, and relatively inexpensive device that can be used for human indoor pose estimation tasks instead of RGB cameras.
- However, accurately extracting information from the reflected radar signals has been a challenge, limiting the pose estimation accuracy.
- This paper introduces a novel radar feature extraction framework called ProbRadarM3F that combines traditional heatmap features with positional features using a probability map-based approach.
- ProbRadarM3F outperforms other methods on the HuPR dataset, demonstrating the potential of exploiting position information from mmWave radar signals.
Plain English Explanation
Millimeter wave (mmWave) radar is a type of sensor that can be used to track the movements of people indoors, without the need for cameras that could infringe on their privacy. This technology has been explored as an alternative to traditional RGB cameras for tasks like estimating the pose (position and orientation) of a person's body.
The challenge with using mmWave radar is that the reflected signals contain a lot of information, but it's difficult to fully extract and use that information to get accurate pose estimates. This paper introduces a new approach called ProbRadarM3F that aims to address this challenge.
ProbRadarM3F combines two types of features extracted from the radar signals: traditional heatmap features and positional features based on a probability map. By fusing these two types of features, the model is able to better estimate the positions of 14 key points on the human body, outperforming other methods tested on the HuPR dataset.
The key insight here is that the position information in the radar signals, which hasn't been fully utilized before, can be an important source of information for improving pose estimation. This opens up new avenues for researchers to explore other untapped sources of information in mmWave radar data to further enhance its capabilities.
Technical Explanation
The paper introduces a novel radar feature extraction framework called ProbRadarM3F, which combines traditional heatmap features with positional features derived from a probability map-based approach.
Traditionally, radar-based pose estimation has relied on heatmap features extracted using Fourier transform-based methods. However, this approach does not fully capture the position information contained in the radar signals. To address this, ProbRadarM3F employs a parallel processing pipeline that generates positional features using a probability map-based encoding scheme.
The probability map is created by discretizing the target space and assigning probabilities to each location based on the radar reflections. These positional features are then fused with the traditional heatmap features using a multi-format feature fusion module.
The resulting fused features are used to estimate the 3D positions of 14 keypoints on the human body. Experimental evaluation on the HuPR dataset demonstrates that ProbRadarM3F outperforms other methods, achieving an average precision (AP) of 69.9%.
The authors emphasize that the key contribution of this work is the exploitation of position information from mmWave radar signals, which has not been fully utilized in previous research. This provides a direction for further exploration of other potential non-redundant information that can be extracted from mmWave radar data to enhance its capabilities for human pose estimation and related applications.
Critical Analysis
The paper presents a promising approach to improving human pose estimation using mmWave radar, a technology that offers privacy-preserving and cost-effective advantages over traditional RGB cameras. The key innovation of ProbRadarM3F is its ability to effectively leverage positional information from the radar signals, which has been an underexplored area in previous research.
However, the paper does not provide a detailed analysis of the limitations of the proposed method. For example, it would be useful to understand how ProbRadarM3F performs under different environmental conditions, occlusions, or with varying numbers of people in the scene. Additionally, the authors could have discussed the computational complexity and real-time inference capabilities of the model, as these factors are crucial for practical deployment.
Furthermore, the paper could have delved deeper into the underlying reasons why the position information in radar signals has not been fully exploited in the past. A more thorough discussion of the challenges and potential pitfalls in extracting and utilizing this information would have strengthened the paper's contributions.
Overall, the research presented in this paper is a valuable step forward in enhancing the capabilities of mmWave radar for human pose estimation. However, further investigation into the method's limitations and potential areas for improvement would help to contextualize the findings and guide future research in this field.
Conclusion
This paper introduces a novel radar feature extraction framework called ProbRadarM3F, which combines traditional heatmap features with positional features derived from a probability map-based approach. By fusing these two types of features, ProbRadarM3F is able to outperform other methods in estimating the 3D positions of 14 keypoints on the human body, as demonstrated on the HuPR dataset.
The key insight of this work is the potential of exploiting position information from mmWave radar signals, which has not been fully utilized in previous research. This opens up new avenues for further exploration and enhancement of mmWave radar's capabilities for human pose estimation and related applications, such as activity recognition and SLAM (Simultaneous Localization and Mapping).
As mmWave radar technology continues to advance, the ability to accurately extract and leverage diverse sources of information from the radar signals will be crucial for unlocking its full potential in a variety of real-world scenarios where privacy, cost, and convenience are important factors.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
🎲
0
ProbRadarM3F: mmWave Radar based Human Skeletal Pose Estimation with Probability Map Guided Multi-Format Feature Fusion
Bing Zhu, Zixin He, Weiyi Xiong, Guanhua Ding, Jianan Liu, Tao Huang, Wei Chen, Wei Xiang
Millimeter wave (mmWave) radar is a non-intrusive privacy and relatively convenient and inexpensive device, which has been demonstrated to be applicable in place of RGB cameras in human indoor pose estimation tasks. However, mmWave radar relies on the collection of reflected signals from the target, and the radar signals containing information is difficult to be fully applied. This has been a long-standing hindrance to the improvement of pose estimation accuracy. To address this major challenge, this paper introduces a probability map guided multi-format feature fusion model, ProbRadarM3F. This is a novel radar feature extraction framework using a traditional FFT method in parallel with a probability map based positional encoding method. ProbRadarM3F fuses the traditional heatmap features and the positional features, then effectively achieves the estimation of 14 keypoints of the human body. Experimental evaluation on the HuPR dataset proves the effectiveness of the model proposed in this paper, outperforming other methods experimented on this dataset with an AP of 69.9 %. The emphasis of our study is focusing on the position information that is not exploited before in radar singal. This provides direction to investigate other potential non-redundant information from mmWave rader.
Read more7/1/2024
0
Diffusion Model is a Good Pose Estimator from 3D RF-Vision
Junqiao Fan, Jianfei Yang, Yuecong Xu, Lihua Xie
Human pose estimation (HPE) from Radio Frequency vision (RF-vision) performs human sensing using RF signals that penetrate obstacles without revealing privacy (e.g., facial information). Recently, mmWave radar has emerged as a promising RF-vision sensor, providing radar point clouds by processing RF signals. However, the mmWave radar has a limited resolution with severe noise, leading to inaccurate and inconsistent human pose estimation. This work proposes mmDiff, a novel diffusion-based pose estimator tailored for noisy radar data. Our approach aims to provide reliable guidance as conditions to diffusion models. Two key challenges are addressed by mmDiff: (1) miss-detection of parts of human bodies, which is addressed by a module that isolates feature extraction from different body parts, and (2) signal inconsistency due to environmental interference, which is tackled by incorporating prior knowledge of body structure and motion. Several modules are designed to achieve these goals, whose features work as the conditions for the subsequent diffusion model, eliminating the miss-detection and instability of HPE based on RF-vision. Extensive experiments demonstrate that mmDiff outperforms existing methods significantly, achieving state-of-the-art performances on public datasets.
Read more7/23/2024
0
RT-Pose: A 4D Radar Tensor-based 3D Human Pose Estimation and Localization Benchmark
Yuan-Hao Ho, Jen-Hao Cheng, Sheng Yao Kuan, Zhongyu Jiang, Wenhao Chai, Hsiang-Wei Huang, Chih-Lung Lin, Jenq-Neng Hwang
Traditional methods for human localization and pose estimation (HPE), which mainly rely on RGB images as an input modality, confront substantial limitations in real-world applications due to privacy concerns. In contrast, radar-based HPE methods emerge as a promising alternative, characterized by distinctive attributes such as through-wall recognition and privacy-preserving, rendering the method more conducive to practical deployments. This paper presents a Radar Tensor-based human pose (RT-Pose) dataset and an open-source benchmarking framework. The RT-Pose dataset comprises 4D radar tensors, LiDAR point clouds, and RGB images, and is collected for a total of 72k frames across 240 sequences with six different complexity-level actions. The 4D radar tensor provides raw spatio-temporal information, differentiating it from other radar point cloud-based datasets. We develop an annotation process using RGB images and LiDAR point clouds to accurately label 3D human skeletons. In addition, we propose HRRadarPose, the first single-stage architecture that extracts the high-resolution representation of 4D radar tensors in 3D space to aid human keypoint estimation. HRRadarPose outperforms previous radar-based HPE work on the RT-Pose benchmark. The overall HRRadarPose performance on the RT-Pose dataset, as reflected in a mean per joint position error (MPJPE) of 9.91cm, indicates the persistent challenges in achieving accurate HPE in complex real-world scenarios. RT-Pose is available at https://huggingface.co/datasets/uwipl/RT-Pose.
Read more7/22/2024
0
G3R: Generating Rich and Fine-grained mmWave Radar Data from 2D Videos for Generalized Gesture Recognition
Kaikai Deng, Dong Zhao, Wenxin Zheng, Yue Ling, Kangwen Yin, Huadong Ma
Millimeter wave radar is gaining traction recently as a promising modality for enabling pervasive and privacy-preserving gesture recognition. However, the lack of rich and fine-grained radar datasets hinders progress in developing generalized deep learning models for gesture recognition across various user postures (e.g., standing, sitting), positions, and scenes. To remedy this, we resort to designing a software pipeline that exploits wealthy 2D videos to generate realistic radar data, but it needs to address the challenge of simulating diversified and fine-grained reflection properties of user gestures. To this end, we design G3R with three key components: (i) a gesture reflection point generator expands the arm's skeleton points to form human reflection points; (ii) a signal simulation model simulates the multipath reflection and attenuation of radar signals to output the human intensity map; (iii) an encoder-decoder model combines a sampling module and a fitting module to address the differences in number and distribution of points between generated and real-world radar data for generating realistic radar data. We implement and evaluate G3R using 2D videos from public data sources and self-collected real-world radar data, demonstrating its superiority over other state-of-the-art approaches for gesture recognition.
Read more4/24/2024