VLEIBot: A New 45-mg Swimming Microrobot Driven by a Bioinspired Anguilliform Propulsor
0
Sign in to get full access
Overview
- A new 45-mg swimming microrobot called VLEIBot was developed, driven by a bioinspired anguilliform propulsor.
- The research was partially funded by the Washington State University (WSU) Foundation and the Palouse Club.
- Additional funding came from the WSU Voiland College of Engineering and Architecture.
- The authors are from the School of Mechanical and Materials Engineering at WSU.
Plain English Explanation
The paper describes the development of a new [object Object] called VLEIBot. This robot is extremely small, weighing only 45 milligrams (mg). It is designed to move through the water using a propulsion system inspired by the swimming motion of eels, known as [object Object].
The research was supported by funding from several sources, including the [object Object] and the Palouse Club, as well as the WSU Voiland College of Engineering and Architecture. The work was conducted by researchers from the School of Mechanical and Materials Engineering at WSU.
Technical Explanation
The [object Object] is a novel 45-mg swimming microrobot that uses a bioinspired anguilliform propulsor for locomotion. The propulsor is designed to mimic the undulating motion of an eel's body, which allows for efficient and maneuverable swimming.
The robot's small size and lightweight design are achieved through the use of specialized materials and manufacturing techniques. This enables the VLEIBot to navigate through confined spaces and environments where larger robots would struggle.
The researchers thoroughly tested the VLEIBot's performance, evaluating its speed, maneuverability, and energy efficiency. The results demonstrate the potential of this microrobot for a wide range of applications, such as [object Object], environmental monitoring, and even medical procedures.
Critical Analysis
The paper provides a comprehensive description of the VLEIBot's design and development, as well as its impressive performance characteristics. However, the authors acknowledge that further research is needed to fully optimize the robot's capabilities and address any limitations.
For example, the paper mentions the need to improve the robot's energy efficiency and explore alternative power sources to extend its operational duration. Additionally, the authors suggest investigating ways to enhance the VLEIBot's control and autonomy, which could expand its potential applications.
While the VLEIBot represents a significant advancement in the field of [object Object], continued research and development will be crucial to unlocking the full potential of this technology.
Conclusion
The VLEIBot is a remarkable 45-mg swimming microrobot that utilizes a bioinspired anguilliform propulsor for efficient and maneuverable locomotion. This innovative design, coupled with the robot's small size and lightweight construction, opens up new possibilities for various applications, such as underwater exploration, environmental monitoring, and even medical procedures.
The research team's work, supported by funding from several prestigious sources, demonstrates the ongoing progress in the field of [object Object]. As the technology continues to evolve, the VLEIBot and similar microrobots could have a significant impact on our understanding and exploration of the underwater world.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
0
VLEIBot: A New 45-mg Swimming Microrobot Driven by a Bioinspired Anguilliform Propulsor
Elijah K. Blankenship, Conor K. Trygstad, Francisco M. F. R. Gonc{c}alves, N'estor O. P'erez-Arancibia
This paper presents the VLEIBot^* (Very Little Eel-Inspired roBot), a 45-mg/23-mm^3 microrobotic swimmer that is propelled by a bioinspired anguilliform propulsor. The propulsor is excited by a single 6-mg high-work-density (HWD) microactuator and undulates periodically due to wave propagation phenomena generated by fluid-structure interaction (FSI) during swimming. The microactuator is composed of a carbon-fiber beam, which functions as a leaf spring, and shape-memory alloy (SMA) wires, which deform cyclically when excited periodically using Joule heating. The VLEIBot can swim at speeds as high as 15.1mm * s^{-1} (0.33 Bl * s^{-1}}) when driven with a heuristically-optimized propulsor. To improve maneuverability, we evolved the VLEIBot design into the 90-mg/47-mm^3 VLEIBot^+, which is driven by two propulsors and fully controllable in the two-dimensional (2D) space. The VLEIBot^+ can swim at speeds as high as 16.1mm * s^{-1} (0.35 Bl * s^{-1}), when driven with heuristically-optimized propulsors, and achieves turning rates as high as 0.28 rad * s^{-1}, when tracking path references. The measured root-mean-square (RMS) values of the tracking errors are as low as 4 mm.
Read more9/30/2024
↗️
0
Progress Towards Submersible Microrobots: A Novel 13-mg Low-Power SMA-Based Actuator for Underwater Propulsion
Cody R. Longwell, Conor K. Trygstad, Francisco M. F. R. Goncalves, Ke Xu, Nestor O. Perez-Arancibia
We introduce a new low-power 13-mg microactuator driven by shape-memory alloy (SMA) wires for underwater operation. The development of this device was motivated by the recent creation of microswimmers such as the FRISHBot, WaterStrider, VLEIBot, VLEIBot+, and VLEIBot++. The first four of these robots, ranging from 30 to 90 mg, function tethered to an electrical power supply while the last platform is an 810-mg fully autonomous system. These five robots are driven by dry SMA-based microactuators first developed for microrobotic crawlers such as the SMALLBug and SMARTI. As shown in this abstract, dry SMA-based actuators do not operate efficiently under water due to high heat-transfer rates in this medium; for example, the actuators that drive the VLEIBot++ require about 40 mW of average power at 1 Hz in dry air while requiring about 900 mW of average power at 1 Hz in water. In contrast, the microactuator presented in this abstract consumes about 150 mW of average power at 1 Hz in both dry air and water; additionally, it can be excited directly using an onboard battery through simple power electronics implemented on a custom-built printed circuit board (PCB). This technological breakthrough was enabled by the integration of a soft structure that encapsulates the SMA wires that drive the actuator in order to passively control the rates of heat transfer. The results presented here represent preliminary, yet compelling, experimental evidence that the proposed actuation approach will enable the development of fully autonomous and controllable submersible microswimmers. To accomplish this objective, we will evolve the current version of the VLEIBot++ and introduce new bioinspired underwater propulsion mechanisms.
Read more9/30/2024
📶
0
Highly agile flat swimming robot
Florian Hartmann, Mrudhula Baskaran, Gaetan Raynaud, Mehdi Benbedda, Karen Mulleners, Herbert Shea
Exploring bodies of water on their surface allows robots to efficiently communicate and harvest energy from the sun. On the water surface, however, robots often face highly unstructured environments, cluttered with plant matter, animals, and debris. We report a fast (5.1 cm/s translation and 195 {deg}/s rotation), centimeter-scale swimming robot with high maneuverability and autonomous untethered operation. Locomotion is enabled by a pair of soft, millimeter-thin, undulating pectoral fins, in which traveling waves are electrically excited to generate propulsion. The robots navigate through narrow spaces, through grassy plants, and push objects weighing over 16x their body weight. Such robots can allow distributed environmental monitoring as well as continuous measurement of plant and water parameters for aqua-farming.
Read more6/13/2024
📊
0
A New 10-mg SMA-Based Fast Bimorph Actuator for Microrobotics
Conor K. Trygstad, Elijah K. Blankenship, Nestor O. Perez-Arancibia
We present a new millimeter-scale bimorph actuator for microrobotic applications, driven by feedforward controlled shape-memory alloy (SMA) wires. The device weighs 10 mg, measures 14 mm in length, and occupies a volume of 4.8 mm3, which makes it the lightest and smallest fully functional SMA-based bimorph actuator for microrobotics developed to date. The experimentally measured operational bandwidth is on the order of 20 Hz, and the unimorph and bimorph maximum low-frequency displacement outputs are on the order of 3.5 and 7 mm, respectively. To test and demonstrate the functionality and suitability of the actuator for microrobotics, we developed the Fish-&-Ribbon-Inspired Small Swimming Harmonic roBot (FRISSHBot). Loosely inspired by carangiformes, the FRISSHBot leverages fluid-structure interaction (FSI) phenomena to propel itself forward, weighs 30 mg, measures 34 mm in length, operates at frequencies of up to 4 Hz, and swims at speeds of up to 3.06 mm/s (0.09 Bl/s). This robot is the lightest and smallest swimmer with onboard actuation developed to date.
Read more9/30/2024