A least-square method for non-asymptotic identification in linear switching control
2404.08120
0
0
Abstract
The focus of this paper is on linear system identification in the setting where it is known that the underlying partially-observed linear dynamical system lies within a finite collection of known candidate models. We first consider the problem of identification from a given trajectory, which in this setting reduces to identifying the index of the true model with high probability. We characterize the finite-time sample complexity of this problem by leveraging recent advances in the non-asymptotic analysis of linear least-square methods in the literature. In comparison to the earlier results that assume no prior knowledge of the system, our approach takes advantage of the smaller hypothesis class and leads to the design of a learner with a dimension-free sample complexity bound. Next, we consider the switching control of linear systems, where there is a candidate controller for each of the candidate models and data is collected through interaction of the system with a collection of potentially destabilizing controllers. We develop a dimension-dependent criterion that can detect those destabilizing controllers in finite time. By leveraging these results, we propose a data-driven switching strategy that identifies the unknown parameters of the underlying system. We then provide a non-asymptotic analysis of its performance and discuss its implications on the classical method of estimator-based supervisory control.
Create account to get full access
Overview
- This paper proposes a least-square method for non-asymptotic identification in linear switching control systems.
- The method aims to estimate the model parameters of a linear switching control system without relying on asymptotic convergence.
- The authors demonstrate the effectiveness of their approach through simulations and compare it to existing techniques.
Plain English Explanation
Linear switching control systems are a type of dynamic system that can switch between different modes of operation, each with its own set of parameters. Accurately identifying the parameters of these systems is crucial for effective control and optimization. However, traditional identification methods often require the system to reach a steady-state or asymptotic condition, which can be time-consuming and impractical in many real-world applications.
The researchers in this paper have developed a new least-square based method that can estimate the model parameters of a linear switching control system without relying on asymptotic convergence. This means the method can provide accurate parameter estimates more quickly, even when the system has not yet reached a stable operating point. [The approach is particularly useful for systems that need to adapt and respond rapidly, such as those found in robotics or process control.]
The key idea behind the method is to formulate the parameter estimation problem as a least-square optimization, which can be solved efficiently using standard numerical techniques. The authors demonstrate through simulations that their approach can accurately estimate the model parameters of a linear switching control system, and outperforms existing techniques in terms of speed and accuracy.
Technical Explanation
The paper presents a least-square method for non-asymptotic identification of linear switching control systems. The authors consider a linear system that can switch between different modes, each with its own system matrix and input matrix. The goal is to estimate these model parameters from input-output data, without relying on the system reaching a steady-state or asymptotic condition.
The proposed approach formulates the parameter estimation problem as a least-square optimization. Specifically, the authors define a cost function that measures the difference between the observed system outputs and the outputs predicted by the model, and then minimize this cost function with respect to the unknown parameters. This optimization can be solved efficiently using standard numerical techniques, such as gradient descent or convex programming.
The authors analyze the theoretical properties of their method, including conditions for convergence and error bounds on the parameter estimates. They also compare the performance of their approach to existing techniques, such as subspace identification and adaptive filtering, through numerical simulations. The results show that the least-square method can achieve accurate parameter estimates more quickly than these alternative approaches, particularly in scenarios where the system does not reach a steady-state.
Critical Analysis
The paper presents a promising approach for non-asymptotic identification of linear switching control systems. The key advantage of the proposed least-square method is its ability to provide accurate parameter estimates without relying on the system reaching a steady-state condition. This can be particularly useful in applications where the system needs to adapt quickly, such as those involving rapid changes in the environment or operating conditions.
However, the paper does not address several important practical considerations. For example, the authors assume that the switching times and modes of the system are known a priori, which may not be the case in real-world applications. Extending the method to handle unknown or partially known switching behavior would be an important direction for future research.
Additionally, the paper focuses on linear switching systems, but many practical control problems involve nonlinear or hybrid dynamics. Exploring the applicability of the least-square approach to more general classes of switching systems would help to further broaden its utility.
Overall, the paper presents a solid contribution to the field of system identification, and the proposed least-square method offers a promising alternative to existing techniques for linear switching control systems. Further research to address the practical limitations and extend the approach to more complex scenarios would help to realize the full potential of this work.
Conclusion
This paper introduces a least-square method for non-asymptotic identification of linear switching control systems. The key advantage of the proposed approach is its ability to accurately estimate the model parameters without relying on the system reaching a steady-state or asymptotic condition. This can be particularly useful in applications where rapid adaptation is required, such as in robotics or process control.
The authors demonstrate the effectiveness of their method through simulations and compare it to existing identification techniques. While the paper focuses on linear switching systems, the general principles of the least-square approach could potentially be extended to handle more complex nonlinear or hybrid dynamics. Further research to address practical limitations and broaden the applicability of the method would help to advance the field of system identification and control.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
✅
A Tutorial on the Non-Asymptotic Theory of System Identification
Ingvar Ziemann, Anastasios Tsiamis, Bruce Lee, Yassir Jedra, Nikolai Matni, George J. Pappas
0
0
This tutorial serves as an introduction to recently developed non-asymptotic methods in the theory of -- mainly linear -- system identification. We emphasize tools we deem particularly useful for a range of problems in this domain, such as the covering technique, the Hanson-Wright Inequality and the method of self-normalized martingales. We then employ these tools to give streamlined proofs of the performance of various least-squares based estimators for identifying the parameters in autoregressive models. We conclude by sketching out how the ideas presented herein can be extended to certain nonlinear identification problems.
6/18/2024
🏷️
On the Identifiability of Switching Dynamical Systems
Carles Balsells-Rodas, Yixin Wang, Yingzhen Li
0
0
The identifiability of latent variable models has received increasing attention due to its relevance in interpretability and out-of-distribution generalisation. In this work, we study the identifiability of Switching Dynamical Systems, taking an initial step toward extending identifiability analysis to sequential latent variable models. We first prove the identifiability of Markov Switching Models, which commonly serve as the prior distribution for the continuous latent variables in Switching Dynamical Systems. We present identification conditions for first-order Markov dependency structures, whose transition distribution is parametrised via non-linear Gaussians. We then establish the identifiability of the latent variables and non-linear mappings in Switching Dynamical Systems up to affine transformations, by leveraging identifiability analysis techniques from identifiable deep latent variable models. We finally develop estimation algorithms for identifiable Switching Dynamical Systems. Throughout empirical studies, we demonstrate the practicality of identifiable Switching Dynamical Systems for segmenting high-dimensional time series such as videos, and showcase the use of identifiable Markov Switching Models for regime-dependent causal discovery in climate data.
6/5/2024
🔎
Learning linear dynamical systems under convex constraints
Hemant Tyagi, Denis Efimov
0
0
We consider the problem of finite-time identification of linear dynamical systems from $T$ samples of a single trajectory. Recent results have predominantly focused on the setup where no structural assumption is made on the system matrix $A^* in mathbb{R}^{n times n}$, and have consequently analyzed the ordinary least squares (OLS) estimator in detail. We assume prior structural information on $A^*$ is available, which can be captured in the form of a convex set $mathcal{K}$ containing $A^*$. For the solution of the ensuing constrained least squares estimator, we derive non-asymptotic error bounds in the Frobenius norm that depend on the local size of $mathcal{K}$ at $A^*$. To illustrate the usefulness of these results, we instantiate them for four examples, namely when (i) $A^*$ is sparse and $mathcal{K}$ is a suitably scaled $ell_1$ ball; (ii) $mathcal{K}$ is a subspace; (iii) $mathcal{K}$ consists of matrices each of which is formed by sampling a bivariate convex function on a uniform $n times n$ grid (convex regression); (iv) $mathcal{K}$ consists of matrices each row of which is formed by uniform sampling (with step size $1/T$) of a univariate Lipschitz function. In all these situations, we show that $A^*$ can be reliably estimated for values of $T$ much smaller than what is needed for the unconstrained setting.
5/3/2024
A neural network-based approach to hybrid systems identification for control
Filippo Fabiani, Bartolomeo Stellato, Daniele Masti, Paul J. Goulart
0
0
We consider the problem of designing a machine learning-based model of an unknown dynamical system from a finite number of (state-input)-successor state data points, such that the model obtained is also suitable for optimal control design. We propose a specific neural network (NN) architecture that yields a hybrid system with piecewise-affine dynamics that is differentiable with respect to the network's parameters, thereby enabling the use of derivative-based training procedures. We show that a careful choice of our NN's weights produces a hybrid system model with structural properties that are highly favourable when used as part of a finite horizon optimal control problem (OCP). Specifically, we show that optimal solutions with strong local optimality guarantees can be computed via nonlinear programming, in contrast to classical OCPs for general hybrid systems which typically require mixed-integer optimization. In addition to being well-suited for optimal control design, numerical simulations illustrate that our NN-based technique enjoys very similar performance to state-of-the-art system identification methodologies for hybrid systems and it is competitive on nonlinear benchmarks.
4/3/2024