Rotation Initialization and Stepwise Refinement for Universal LiDAR Calibration
0
๐งช
Sign in to get full access
Overview
- Autonomous systems often use multiple LiDAR sensors to improve perception and robustness
- Calibrating the spatial relationship (extrinsic) between these LiDAR sensors is a critical requirement
- Existing calibration methods are not universal or sensor-agnostic, leaving room for improvement
Plain English Explanation
Autonomous vehicles, robots, and other self-driving systems often use multiple light detection and ranging (LiDAR) sensors to gather detailed 3D data about their surroundings. By combining the information from several LiDAR units, these systems can enhance their understanding of the environment and become more reliable.
However, for the data from multiple LiDARs to be used effectively, the systems need to know the exact spatial relationship, or extrinsic calibration, between each sensor. Calibrating these LiDARs is a crucial prerequisite for autonomous operation.
While there has been progress in developing multi-LiDAR calibration techniques, a universal, sensor-agnostic method remains elusive. This research proposes a new calibration framework to address this challenge.
Technical Explanation
The researchers first design a descriptor called TERRA to initialize the 3D rotation between LiDAR sensors with no prior knowledge. They then present JEEP, which jointly estimates the extrinsic parameters and the 6-DoF pose of the LiDARs by integrating geometric and motion information. This helps overcome factors that can affect the accuracy of point cloud registration.
The LiDAR poses optimized by this hierarchical optimization module are then input to a time synchronization module to produce the final calibration results, including time offsets between the sensors.
The effectiveness of this approach is verified through extensive experiments on eight datasets, involving a total of 16 diverse LiDAR models and dozens of calibration tasks. Even in challenging scenarios, the calibration errors were maintained within 5 cm and 1 degree with a high success rate.
Critical Analysis
The researchers acknowledge that their method still has some limitations, such as the need for specific motion patterns during calibration. They also note that further research is needed to improve the robustness and generalization capabilities of the approach.
Additionally, the paper does not provide a comparative analysis with other state-of-the-art LiDAR-IMU or LiDAR-wheel odometry calibration techniques, such as MAD-ICP, which could offer valuable insights.
Conclusion
This research presents a promising framework for calibrating multiple LiDAR sensors in autonomous systems. By leveraging both geometric and motion information, the proposed approach can achieve accurate extrinsic and time synchronization calibration, even with diverse LiDAR models and challenging scenarios.
While further improvements are still needed, this work represents an important step towards developing a universal, sensor-agnostic calibration solution for the growing field of autonomous robotics and vehicles.
This summary was produced with help from an AI and may contain inaccuracies - check out the links to read the original source documents!
Related Papers
๐งช
0
Rotation Initialization and Stepwise Refinement for Universal LiDAR Calibration
Yifan Duan, Xinran Zhang, Guoliang You, Yilong Wu, Xingchen Li, Yao Li, Xiaomeng Chu, Jie Peng, Yu Zhang, Jianmin Ji, Yanyong Zhang
Autonomous systems often employ multiple LiDARs to leverage the integrated advantages, enhancing perception and robustness. The most critical prerequisite under this setting is the estimating the extrinsic between each LiDAR, i.e., calibration. Despite the exciting progress in multi-LiDAR calibration efforts, a universal, sensor-agnostic calibration method remains elusive. According to the coarse-to-fine framework, we first design a spherical descriptor TERRA for 3-DoF rotation initialization with no prior knowledge. To further optimize, we present JEEP for the joint estimation of extrinsic and pose, integrating geometric and motion information to overcome factors affecting the point cloud registration. Finally, the LiDAR poses optimized by the hierarchical optimization module are input to time syn- chronization module to produce the ultimate calibration results, including the time offset. To verify the effectiveness, we conduct extensive experiments on eight datasets, where 16 diverse types of LiDARs in total and dozens of calibration tasks are tested. In the challenging tasks, the calibration errors can still be controlled within 5cm and 1{deg} with a high success rate.
Read more5/10/2024
0
YOCO: You Only Calibrate Once for Accurate Extrinsic Parameter in LiDAR-Camera Systems
Tianle Zeng, Dengke He, Feifan Yan, Meixi He
In a multi-sensor fusion system composed of cameras and LiDAR, precise extrinsic calibration contributes to the system's long-term stability and accurate perception of the environment. However, methods based on extracting and registering corresponding points still face challenges in terms of automation and precision. This paper proposes a novel fully automatic extrinsic calibration method for LiDAR-camera systems that circumvents the need for corresponding point registration. In our approach, a novel algorithm to extract required LiDAR correspondence point is proposed. This method can effectively filter out irrelevant points by computing the orientation of plane point clouds and extracting points by applying distance- and density-based thresholds. We avoid the need for corresponding point registration by introducing extrinsic parameters between the LiDAR and camera into the projection of extracted points and constructing co-planar constraints. These parameters are then optimized to solve for the extrinsic. We validated our method across multiple sets of LiDAR-camera systems. In synthetic experiments, our method demonstrates superior performance compared to current calibration techniques. Real-world data experiments further confirm the precision and robustness of the proposed algorithm, with average rotation and translation calibration errors between LiDAR and camera of less than 0.05 degree and 0.015m, respectively. This method enables automatic and accurate extrinsic calibration in a single one step, emphasizing the potential of calibration algorithms beyond using corresponding point registration to enhance the automation and precision of LiDAR-camera system calibration.
Read more7/26/2024
0
Extrinsic Calibration of Multiple LiDARs for a Mobile Robot based on Floor Plane And Object Segmentation
Shun Niijima, Atsushi Suzuki, Ryoichi Tsuzaki, Masaya Kinoshita
Mobile robots equipped with multiple light detection and ranging (LiDARs) and capable of recognizing their surroundings are increasing due to the minitualization and cost reduction of LiDAR. This paper proposes a target-less extrinsic calibration method of multiple LiDARs with non-overlapping field of view (FoV). The proposed method uses accumulated point clouds of floor plane and objects while in motion. It enables accurate calibration with challenging configuration of LiDARs that directed towards the floor plane, caused by biased feature values. Additionally, the method includes a noise removal module that considers the scanning pattern to address bleeding points, which are noises of significant source of error in point cloud alignment using high-density LiDARs. Evaluations through simulation demonstrate that the proposed method achieved higher accuracy extrinsic calibration with two and four LiDARs than conventional methods, regardless type of objects. Furthermore, the experiments using a real mobile robot has shown that our proposed noise removal module can eliminate noise more precisely than conventional methods, and the estimated extrinsic parameters have successfully created consistent 3D maps.
Read more9/16/2024
๐ง
0
New!UniCal: Unified Neural Sensor Calibration
Ze Yang, George Chen, Haowei Zhang, Kevin Ta, Ioan Andrei B^arsan, Daniel Murphy, Sivabalan Manivasagam, Raquel Urtasun
Self-driving vehicles (SDVs) require accurate calibration of LiDARs and cameras to fuse sensor data accurately for autonomy. Traditional calibration methods typically leverage fiducials captured in a controlled and structured scene and compute correspondences to optimize over. These approaches are costly and require substantial infrastructure and operations, making it challenging to scale for vehicle fleets. In this work, we propose UniCal, a unified framework for effortlessly calibrating SDVs equipped with multiple LiDARs and cameras. Our approach is built upon a differentiable scene representation capable of rendering multi-view geometrically and photometrically consistent sensor observations. We jointly learn the sensor calibration and the underlying scene representation through differentiable volume rendering, utilizing outdoor sensor data without the need for specific calibration fiducials. This drive-and-calibrate approach significantly reduces costs and operational overhead compared to existing calibration systems, enabling efficient calibration for large SDV fleets at scale. To ensure geometric consistency across observations from different sensors, we introduce a novel surface alignment loss that combines feature-based registration with neural rendering. Comprehensive evaluations on multiple datasets demonstrate that UniCal outperforms or matches the accuracy of existing calibration approaches while being more efficient, demonstrating the value of UniCal for scalable calibration.
Read more9/30/2024